From mboxrd@z Thu Jan 1 00:00:00 1970 From: mathieu.poirier@linaro.org (Mathieu Poirier) Date: Wed, 20 Jul 2016 14:38:14 -0600 Subject: [PATCH V2 0/6] perf: Driver specific configuration for PMU Message-ID: <1469047100-18131-1-git-send-email-mathieu.poirier@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patchset adds the possiblity of specifying PMU driver configuration directly from the perf command line. Anything that falls within the event specifiers '/.../' and that is preceeded by the '@' symbol is treated as a configurable. Two formats are supported, @cfg and @cfg=config. For example: perf record -e some_event/@cfg1/ ... or perf record -e some_event/@cfg2=config/ ... or perf record -e some_event/@cfg1, at cfg2=config/ ... The above are all valid configuration and will see the strings 'cfg1' and 'cfg2=config' sent to the PMU driver for parsing and interpretation using the existing ioctl() mechanism. The primary customers for this feature are the CoreSight drivers where the selection of a sink (where trace data is accumulated) needs to be done in a previous, and separated step, from the launching of the perf command. As such something that used to be a two-step process: # echo 1 > /sys/bus/coresight/devices/20070000.etr/enable_sink # perf record -e cs_etm//u --per-thread uname is integrated in a single command: # perf record -e cs_etm/@sink=20070000.etr/u --per-thread uname The patches include both the kernel and user space part so that the solution is complete and found in a single place. It is based on [1] and assumes this set [2] has been applied. Thanks, Mathieu Changes for V2: - Rebased to [1] as per Jiri's request. [1]. git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git perf/core [2]. https://lkml.org/lkml/2016/7/20/519 Mathieu Poirier (6): perf/core: Adding PMU driver specific configuration perf: Passing struct perf_event to function setup_aux() perf tools: add infrastructure for PMU specific configuration perf tools: pushing driver configuration down to the kernel coresight: adding sink parameter to function coresight_build_path() coresight: etm-perf: incorporating sink definition from cmd line arch/x86/events/intel/bts.c | 4 +- arch/x86/events/intel/pt.c | 5 +- drivers/hwtracing/coresight/coresight-etm-perf.c | 105 ++++++++++++++++++++++- drivers/hwtracing/coresight/coresight-priv.h | 3 +- drivers/hwtracing/coresight/coresight.c | 40 ++++++--- include/linux/perf_event.h | 11 ++- include/uapi/linux/perf_event.h | 1 + kernel/events/core.c | 16 ++++ kernel/events/ring_buffer.c | 2 +- tools/include/uapi/linux/perf_event.h | 1 + tools/perf/builtin-record.c | 9 ++ tools/perf/util/evlist.c | 24 ++++++ tools/perf/util/evlist.h | 3 + tools/perf/util/evsel.c | 33 +++++++ tools/perf/util/evsel.h | 7 ++ tools/perf/util/parse-events.c | 76 +++++++++++----- tools/perf/util/parse-events.h | 1 + tools/perf/util/parse-events.l | 12 +++ tools/perf/util/parse-events.y | 11 +++ 19 files changed, 321 insertions(+), 43 deletions(-) -- 2.7.4