linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hl@rock-chips.com (Lin Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/7] clk: rockchip: rk3399: add ddrc clock support
Date: Fri, 22 Jul 2016 17:07:17 +0800	[thread overview]
Message-ID: <1469178440-4668-5-git-send-email-hl@rock-chips.com> (raw)
In-Reply-To: <1469178440-4668-1-git-send-email-hl@rock-chips.com>

add ddrc clock setting, so we can do ddr frequency
scaling on rk3399 platform in future.

Signed-off-by: Lin Huang <hl@rock-chips.com>
---
Changes in v3:
- None

Changes in v2:
- remove clk_ddrc_dpll_src from critical clock list

Changes in v1:
- remove ddrc source CLK_IGNORE_UNUSED flag
- move clk_ddrc and clk_ddrc_dpll_src to critical

 drivers/clk/rockchip/clk-rk3399.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index c109d80..7ef9d82 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -118,6 +118,10 @@ PNAME(mux_armclkb_p)				= { "clk_core_b_lpll_src",
 						    "clk_core_b_bpll_src",
 						    "clk_core_b_dpll_src",
 						    "clk_core_b_gpll_src" };
+PNAME(mux_ddrclk_p)				= { "clk_ddrc_lpll_src",
+						    "clk_ddrc_bpll_src",
+						    "clk_ddrc_dpll_src",
+						    "clk_ddrc_gpll_src" };
 PNAME(mux_aclk_cci_p)				= { "cpll_aclk_cci_src",
 						    "gpll_aclk_cci_src",
 						    "npll_aclk_cci_src",
@@ -1377,6 +1381,18 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "clk_test", "clk_test_pre", CLK_IGNORE_UNUSED,
 			RK3368_CLKSEL_CON(58), 0, 5, DFLAGS,
 			RK3368_CLKGATE_CON(13), 11, GFLAGS),
+
+	/* ddrc */
+	GATE(0, "clk_ddrc_lpll_src", "lpll", 0, RK3399_CLKGATE_CON(3),
+	     0, GFLAGS),
+	GATE(0, "clk_ddrc_bpll_src", "bpll", 0, RK3399_CLKGATE_CON(3),
+	     1, GFLAGS),
+	GATE(0, "clk_ddrc_dpll_src", "dpll", 0, RK3399_CLKGATE_CON(3),
+	     2, GFLAGS),
+	GATE(0, "clk_ddrc_gpll_src", "gpll", 0, RK3399_CLKGATE_CON(3),
+	     3, GFLAGS),
+	COMPOSITE_DDRC(SCLK_DDRCLK, "clk_ddrc", mux_ddrclk_p, 0,
+		       RK3399_CLKSEL_CON(6), 4, 2, MFLAGS, 0, 3, DFLAGS),
 };
 
 static struct rockchip_clk_branch rk3399_clk_pmu_branches[] __initdata = {
@@ -1487,6 +1503,9 @@ static const char *const rk3399_cru_critical_clocks[] __initconst = {
 	"gpll_hclk_perilp1_src",
 	"gpll_aclk_perilp0_src",
 	"gpll_aclk_perihp_src",
+
+	/* ddrc */
+	"clk_ddrc"
 };
 
 static const char *const rk3399_pmucru_critical_clocks[] __initconst = {
-- 
2.6.6

  parent reply	other threads:[~2016-07-22  9:07 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-22  9:07 [PATCH v3 0/7] rk3399 support ddr frequency scaling Lin Huang
2016-07-22  9:07 ` [PATCH v3 1/7] firmware: rockchip: sip: Add rockchip SIP runtime service Lin Huang
2016-07-22 10:00   ` Heiko Stübner
2016-07-22 20:50   ` Heiko Stübner
2016-07-24  8:00     ` hl
2016-07-25 17:36     ` Sudeep Holla
2016-07-26  1:13       ` hl
2016-07-22 21:32   ` kbuild test robot
2016-07-26 18:29   ` Mark Rutland
2016-07-22  9:07 ` [PATCH v3 2/7] clk: rockchip: add new clock-type for the ddrclk Lin Huang
2016-07-24  9:09   ` Heiko Stübner
2016-07-22  9:07 ` [PATCH v3 3/7] clk: rockchip: rk3399: add SCLK_DDRCLK ID for ddrc Lin Huang
2016-07-22 10:08   ` Heiko Stübner
2016-07-22  9:07 ` Lin Huang [this message]
2016-07-22  9:07 ` [PATCH v3 5/7] PM / devfreq: event: support rockchip dfi controller Lin Huang
2016-07-22 20:28   ` Paul Gortmaker
2016-07-22  9:07 ` [PATCH v3 6/7] PM / devfreq: rockchip: add devfreq driver for rk3399 dmc Lin Huang
2016-07-22 20:24   ` Paul Gortmaker
2016-07-24  7:54     ` hl
2016-07-25  6:01   ` Chanwoo Choi
2016-07-25  8:47     ` hl
2016-07-25  9:45       ` Chanwoo Choi
2016-07-26  1:15         ` hl
2016-07-22  9:07 ` [PATCH v3 7/7] drm/rockchip: Add dmc notifier in vop driver Lin Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469178440-4668-5-git-send-email-hl@rock-chips.com \
    --to=hl@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).