From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Mon, 1 Aug 2016 16:42:28 +0530 Subject: [PATCH v2 1/3] ARM: dts: DRA7: Add "linux, pci-domain" property for pci dt nodes In-Reply-To: <1470049950-4697-1-git-send-email-kishon@ti.com> References: <1470049950-4697-1-git-send-email-kishon@ti.com> Message-ID: <1470049950-4697-2-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain" property to assign a PCI domain number to each of the host bridges. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 40b69a5..45e9d2d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -301,6 +301,7 @@ 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <0>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; @@ -336,6 +337,7 @@ 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; -- 1.7.9.5