From mboxrd@z Thu Jan 1 00:00:00 1970 From: p.zabel@pengutronix.de (Philipp Zabel) Date: Fri, 05 Aug 2016 11:33:10 +0200 Subject: [PATCH 1/1] imx53.dtsi: Add IPU nodes for csi In-Reply-To: <1470318452-31391-1-git-send-email-fabien.lahoudere@collabora.co.uk> References: <1470318452-31391-1-git-send-email-fabien.lahoudere@collabora.co.uk> Message-ID: <1470389590.3141.22.camel@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Donnerstag, den 04.08.2016, 15:47 +0200 schrieb Fabien Lahoudere: > We have the following messages that tell csi devices are not used: > imx-ipuv3 18000000.ipu: no port at 0 node in /soc/ipu at 18000000, not using CSI0 > imx-ipuv3 18000000.ipu: no port at 1 node in /soc/ipu at 18000000, not using CSI1 > > So we add them in the common device tree to make CSI ports available on > imx53 boards. > > Signed-off-by: Fabien Lahoudere > --- > arch/arm/boot/dts/imx53.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > index c1bc97c..0777b41 100644 > --- a/arch/arm/boot/dts/imx53.dtsi > +++ b/arch/arm/boot/dts/imx53.dtsi > @@ -136,6 +136,14 @@ > clock-names = "bus", "di0", "di1"; > resets = <&src 2>; > > + ipu_csi0: port at 0 { > + reg = <0>; > + }; > + > + ipu_csi1: port at 1 { > + reg = <1>; > + }; > + > ipu_di0: port at 2 { > #address-cells = <1>; > #size-cells = <0>; Acked-by: Philipp Zabel regards Philipp