From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
Date: Sat, 6 Aug 2016 07:56:26 +0300 [thread overview]
Message-ID: <1470459386-5197-4-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1470459386-5197-1-git-send-email-shc_work@mail.ru>
This patch moves SOC_IMX1 into 'Device tree only' category and renames
imx1-dt.c to mach-imx1.c to align with the name schema of other
i.MX DT only platforms.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/configs/imx_v4_v5_defconfig | 1 +
arch/arm/configs/multi_v4t_defconfig | 2 +-
arch/arm/mach-imx/Kconfig | 31 +++++++++++-----------------
arch/arm/mach-imx/Makefile | 4 +---
arch/arm/mach-imx/{imx1-dt.c => mach-imx1.c} | 0
5 files changed, 15 insertions(+), 23 deletions(-)
rename arch/arm/mach-imx/{imx1-dt.c => mach-imx1.c} (100%)
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index e70032c..5f013c9f 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -28,6 +28,7 @@ CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX1=y
CONFIG_SOC_IMX25=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 141492a..9a6390c 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -20,7 +20,7 @@ CONFIG_INTEGRATOR_CM720T=y
CONFIG_INTEGRATOR_CM920T=y
CONFIG_INTEGRATOR_CM922T_XA10=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX1_DT=y
+CONFIG_SOC_IMX1=y
CONFIG_ARCH_NSPIRE=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ca7db32..9da3284 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -64,12 +64,6 @@ config IMX_HAVE_IOMUX_V1
config ARCH_MXC_IOMUX_V3
bool
-config SOC_IMX1
- bool
- select CPU_ARM920T
- select MXC_AVIC
- select PINCTRL_IMX1
-
config SOC_IMX21
bool
select CPU_ARM926T
@@ -97,19 +91,6 @@ config SOC_IMX35
select PINCTRL_IMX35
select SMP_ON_UP if SMP
-if ARCH_MULTI_V4T
-
-comment "MX1 platforms:"
-
-config MACH_IMX1_DT
- bool "Support i.MX1 platforms from device tree"
- select SOC_IMX1
- help
- Include support for Freescale i.MX1 based platforms
- using the device tree for discovery.
-
-endif
-
if ARCH_MULTI_V5
comment "MX21 platforms:"
@@ -445,6 +426,18 @@ endif
comment "Device tree only"
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+ bool "i.MX1 support"
+ select CPU_ARM920T
+ select MXC_AVIC
+ select PINCTRL_IMX1
+ help
+ This enables support for Freescale i.MX1 processor
+
+endif
+
if ARCH_MULTI_V5
config SOC_IMX25
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 3fa087d..2636adf 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -34,9 +34,6 @@ obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
-# i.MX1 based machines
-obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
-
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
@@ -90,6 +87,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
+obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c
similarity index 100%
rename from arch/arm/mach-imx/imx1-dt.c
rename to arch/arm/mach-imx/mach-imx1.c
--
2.7.3
next prev parent reply other threads:[~2016-08-06 4:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-06 4:56 [PATCH v2 1/4] ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support Alexander Shiyan
2016-08-06 4:56 ` [PATCH v2 2/4] ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 " Alexander Shiyan
2016-08-06 4:56 ` [PATCH v2 3/4] ARM: i.MX: Remove i.MX1 non-DT support Alexander Shiyan
2016-08-06 4:56 ` Alexander Shiyan [this message]
2016-08-09 14:52 ` [PATCH v2 1/4] ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470459386-5197-4-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).