From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] of: dma: Move range size workaround to of_dma_get_range()
Date: Tue, 9 Aug 2016 04:19:04 +0530 [thread overview]
Message-ID: <1470696550-3416-3-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1470696550-3416-1-git-send-email-sricharan@codeaurora.org>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Invalid dma-ranges values should be worked around when retrieving the
DMA range in of_dma_get_range(), not by all callers of the function.
This isn't much of a problem now that we have a single caller, but that
situation will change when moving DMA configuration to device probe
time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/of/address.c | 20 ++++++++++++++++++--
drivers/of/device.c | 15 ---------------
2 files changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0a553c0..8cb1aee 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -817,8 +817,8 @@ EXPORT_SYMBOL(of_io_request_and_map);
* CPU addr (phys_addr_t) : pna cells
* size : nsize cells
*
- * It returns -ENODEV if "dma-ranges" property was not found
- * for this device in DT.
+ * Return 0 on success, -ENODEV if the "dma-ranges" property was not found for
+ * this device in DT, or -EINVAL if the CPU address or size is invalid.
*/
int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
{
@@ -879,6 +879,22 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
*dma_addr = dmaaddr;
*size = of_read_number(ranges + naddr + pna, nsize);
+ /*
+ * DT nodes sometimes incorrectly set the size as a mask. Work around
+ * those incorrect DT by computing the size as mask + 1.
+ */
+ if (*size & 1) {
+ pr_warn("%s: size 0x%llx for dma-range in node(%s) set as mask\n",
+ __func__, *size, np->full_name);
+ *size = *size + 1;
+ }
+
+ if (!*size) {
+ pr_err("%s: invalid size zero for dma-range in node(%s)\n",
+ __func__, np->full_name);
+ ret = -EINVAL;
+ goto out;
+ }
pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
*dma_addr, *paddr, *size);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index fd5cfad..d9898d9 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -110,21 +110,6 @@ void of_dma_configure(struct device *dev, struct device_node *np)
size = dev->coherent_dma_mask + 1;
} else {
offset = PFN_DOWN(paddr - dma_addr);
-
- /*
- * Add a work around to treat the size as mask + 1 in case
- * it is defined in DT as a mask.
- */
- if (size & 1) {
- dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
- size);
- size = size + 1;
- }
-
- if (!size) {
- dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
- return;
- }
dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2016-08-08 22:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 22:49 [PATCH 0/8] IOMMU Probe deferral support Sricharan R
2016-08-08 22:49 ` [PATCH 1/8] arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() Sricharan R
2016-09-02 8:16 ` Marek Szyprowski
2016-09-07 6:24 ` Sricharan
2016-08-08 22:49 ` Sricharan R [this message]
2016-08-08 22:49 ` [PATCH 3/8] of: dma: Make of_dma_deconfigure() public Sricharan R
2016-08-08 22:49 ` [PATCH 4/8] of: dma: Split of_configure_dma() into mask and ops configuration Sricharan R
2016-08-12 7:31 ` Tomasz Figa
2016-08-12 15:18 ` Laurent Pinchart
2016-08-12 15:45 ` Sricharan
2016-09-09 6:53 ` Magnus Damm
2016-09-09 9:48 ` Sricharan
2016-08-08 22:49 ` [PATCH 5/8] drivers: platform: Configure dma operations at probe time Sricharan R
2016-08-16 9:25 ` Laurent Pinchart
2016-08-16 12:28 ` Sricharan
2016-08-08 22:49 ` [PATCH 6/8] drivers: platform: Remove call to of_dma_(con/decon)figure_ops Sricharan R
2016-08-12 7:33 ` Tomasz Figa
2016-08-12 15:42 ` Sricharan
2016-08-08 22:49 ` [PATCH 7/8] iommu: of: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2016-08-12 7:46 ` Tomasz Figa
2016-08-12 15:40 ` Sricharan
2016-09-02 8:09 ` Marek Szyprowski
2016-09-07 6:16 ` Sricharan
2016-09-02 12:52 ` Marek Szyprowski
2016-09-07 6:29 ` Sricharan
2016-08-08 22:49 ` [PATCH 8/8] drivers: iommu: arm-smmu: Set iommu_ops in probe Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470696550-3416-3-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).