From mboxrd@z Thu Jan 1 00:00:00 1970 From: guodong.xu@linaro.org (Guodong Xu) Date: Wed, 10 Aug 2016 16:03:47 +0800 Subject: [PATCH v4 1/2] Documentation: synopsys-dw-mshc: add binding for resets In-Reply-To: <1470816228-8874-1-git-send-email-guodong.xu@linaro.org> References: <1470816228-8874-1-git-send-email-guodong.xu@linaro.org> Message-ID: <1470816228-8874-2-git-send-email-guodong.xu@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add resets property to synopsys-dw-mshc bindings. It is intended to represent the hardware reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. Signed-off-by: Guodong Xu Acked-by: Rob Herring --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8636f5a..4e00e85 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -39,6 +39,10 @@ Required Properties: Optional properties: +* resets: phandle + reset specifier pair, intended to represent hardware + reset signal present internally in some host controller IC designs. + See Documentation/devicetree/bindings/reset/reset.txt for details. + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. -- 1.9.1