From mboxrd@z Thu Jan 1 00:00:00 1970 From: linus.walleij@linaro.org (Linus Walleij) Date: Wed, 10 Aug 2016 14:02:17 +0200 Subject: [PATCH] ARM: dts: realview: Fix PBX-A9 cache description Message-ID: <1470830537-12307-1-git-send-email-linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Robin Murphy Clearly QEMU is very permissive in how its PL310 model may be set up, but the real hardware turns out to be far more particular about things actually being correct. Fix up the DT description so that the real thing actually boots: - The arm,data-latency and arm,tag-latency properties need 3 cells to be valid, otherwise we end up retaining the default 8-cycle latencies which leads pretty quickly to lockup. - The arm,dirty-latency property is only relevant to L210/L220, so get rid of it. - The cache geometry override also leads to lockup and/or general misbehaviour. Irritatingly, the manual doesn't state the actual PL310 configuration, but based on the boardfile code and poking registers from the Boot Monitor, it would seem to be 8 sets of 16KB ways. With that, we can successfully boot to enjoy the fun of mismatched FPUs... Cc: stable at vger.kernel.org Signed-off-by: Robin Murphy Tested-by: Mark Rutland Signed-off-by: Linus Walleij --- ARM SoC folks: please apply this directly for fixes. I had queued it for worries of clashing with other updates, but I think it will be fine, and it needs to go in for v4.8. --- arch/arm/boot/dts/arm-realview-pbx-a9.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts index db808f92dd79..90d00b407f85 100644 --- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -70,13 +70,12 @@ * associativity as these may be erroneously set * up by boot loader(s). */ - cache-size = <1048576>; // 1MB - cache-sets = <4096>; + cache-size = <131072>; // 128KB + cache-sets = <512>; cache-line-size = <32>; arm,parity-disable; - arm,tag-latency = <1>; - arm,data-latency = <1 1>; - arm,dirty-latency = <1>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; }; scu: scu at 1f000000 { -- 2.7.4