linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tiffany.lin@mediatek.com (Tiffany Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/9] dt-bindings: Add a binding for Mediatek Video Decoder
Date: Wed, 10 Aug 2016 22:48:49 +0800	[thread overview]
Message-ID: <1470840534-4788-5-git-send-email-tiffany.lin@mediatek.com> (raw)
In-Reply-To: <1470840534-4788-4-git-send-email-tiffany.lin@mediatek.com>

Add a DT binding documentation of Video Decoder for the
MT8173 SoC from Mediatek.

Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Acked-by: Rob Herring <rob@kernel.org>
---
 .../devicetree/bindings/media/mediatek-vcodec.txt  |   57 ++++++++++++++++++--
 1 file changed, 53 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 59a47a5..46c15c5 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -1,25 +1,74 @@
 Mediatek Video Codec
 
 Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding functionalities.
+supports high resolution encoding and decoding functionalities.
 
 Required properties:
 - compatible : "mediatek,mt8173-vcodec-enc" for encoder
+  "mediatek,mt8173-vcodec-dec" for decoder.
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
 - mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
-- clock-names: encoder must contain "venc_sel_src", "venc_sel",
-- "venc_lt_sel_src", "venc_lt_sel".
+- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
+  "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
+  "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
+  "venc_lt_sel", "vdec_bus_clk_src".
 - iommus : should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
 - mediatek,vpu : the node of video processor unit
 
+
 Example:
-vcodec_enc: vcodec at 0x18002000 {
+
+vcodec_dec: vcodec at 16000000 {
+    compatible = "mediatek,mt8173-vcodec-dec";
+    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
+          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
+          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
+          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
+          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
+          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
+          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
+          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
+          <0 0x16026800 0 0x800>,   /*VP8_VD*/
+          <0 0x16027000 0 0x800>,   /*VP6_VD*/
+          <0 0x16027800 0 0x800>,   /*VP8_VL*/
+          <0 0x16028400 0 0x400>;   /*VP9_VD*/
+    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+    mediatek,larb = <&larb1>;
+    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+    mediatek,vpu = <&vpu>;
+    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+  };
+
+  vcodec_enc: vcodec at 0x18002000 {
     compatible = "mediatek,mt8173-vcodec-enc";
     reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
           <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
-- 
1.7.9.5

  reply	other threads:[~2016-08-10 14:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-10 14:48 [PATCH v4 0/9] Add MT8173 Video Decoder Driver Tiffany Lin
2016-08-10 14:48 ` [PATCH v4 1/9] VPU: mediatek: Add decode support Tiffany Lin
2016-08-10 14:48   ` [PATCH v4 2/9] v4l: add Mediatek compressed video block format Tiffany Lin
2016-08-10 14:48     ` [PATCH v4 3/9] docs-rst: Add compressed video formats used on MT8173 codec driver Tiffany Lin
2016-08-10 14:48       ` Tiffany Lin [this message]
2016-08-10 14:48         ` [PATCH v4 5/9] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver Tiffany Lin
2016-08-10 14:48           ` [PATCH v4 6/9] vcodec: mediatek: Add Mediatek H264 " Tiffany Lin
2016-08-10 14:48             ` [PATCH v4 7/9] vcodec: mediatek: Add Mediatek VP8 " Tiffany Lin
2016-08-10 14:48               ` [PATCH v4 8/9] vcodec: mediatek: Add Mediatek VP9 " Tiffany Lin
2016-08-10 14:48                 ` [PATCH v4 9/9] arm64: dts: mediatek: Add Video Decoder for MT8173 Tiffany Lin
2016-08-11 15:44                   ` Matthias Brugger
2016-08-12  9:21                     ` Tiffany Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470840534-4788-5-git-send-email-tiffany.lin@mediatek.com \
    --to=tiffany.lin@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).