public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: p.zabel@pengutronix.de (Philipp Zabel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/4] drm/mediatek: Add gamma correction.
Date: Thu, 11 Aug 2016 09:51:16 +0200	[thread overview]
Message-ID: <1470901876.2493.24.camel@pengutronix.de> (raw)
In-Reply-To: <20160811074410.GF4329@intel.com>

Am Donnerstag, den 11.08.2016, 10:44 +0300 schrieb Ville Syrj?l?:
> On Thu, Aug 11, 2016 at 09:32:59AM +0200, Philipp Zabel wrote:
> > Am Donnerstag, den 28.07.2016, 10:22 +0800 schrieb Bibby Hsieh:
> > > Add gamma set function to correct brightness values.
> > > It applies arbitrary mapping curve to compensate the
> > > incorrect transfer function of the panel.
> > > 
> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |    8 ++++++-
> > >  drivers/gpu/drm/mediatek/mtk_drm_crtc.h     |    1 +
> > >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   31 +++++++++++++++++++++++++++
> > >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   10 +++++++++
> > >  4 files changed, 49 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > index 24aa3ba..cbb460a5 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > @@ -409,6 +409,9 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
> > >  	}
> > >  	if (pending_planes)
> > >  		mtk_crtc->pending_planes = true;
> > > +	if (crtc->state->color_mgmt_changed)
> > > +		for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
> > > +			mtk_ddp_gamma_set(mtk_crtc->ddp_comp[i], crtc->state);
> > >  }
> > >  
> > >  static const struct drm_crtc_funcs mtk_crtc_funcs = {
> > > @@ -418,6 +421,7 @@ static const struct drm_crtc_funcs mtk_crtc_funcs = {
> > >  	.reset			= mtk_drm_crtc_reset,
> > >  	.atomic_duplicate_state	= mtk_drm_crtc_duplicate_state,
> > >  	.atomic_destroy_state	= mtk_drm_crtc_destroy_state,
> > > +	.gamma_set		= drm_atomic_helper_legacy_gamma_set,
> > >  };
> > >  
> > >  static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
> > > @@ -568,7 +572,9 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
> > >  				&mtk_crtc->planes[1].base, pipe);
> > >  	if (ret < 0)
> > >  		goto unprepare;
> > > -
> > > +	drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
> > > +	drm_helper_crtc_enable_color_mgmt(&mtk_crtc->base, MTK_LUT_SIZE,
> > > +					  MTK_LUT_SIZE);
> > 
> > I have applied all four patches and rebased onto v4.8-rc1, replacing
> > drm_helper_crtc_enable_color_mgmt with:
> > 
> > 	drm_crtc_enable_color_mgmt(&mtk_crtc->base, MTK_LUT_SIZE,
> > 				   true, MTK_LUT_SIZE);
> 
> BTW that looks wrong (already in the original). AFAICS the patch just
> handled the gamma_lut, not the degamma_lut, so telling you have both
> is not right.

Thanks, so should that be
       drm_crtc_enable_color_mgmt(&mtk_crtc->base, 0, false,
                                  MTK_LUT_SIZE);
instead, since we only handle gamma?

regards
Philipp

  reply	other threads:[~2016-08-11  7:51 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-28  2:22 [PATCH v4 0/4] drm/mediatek: MT8173 gamma & dither support Bibby Hsieh
2016-07-28  2:22 ` [PATCH v4 1/4] drm/mediatek: Add AAL engine basic function Bibby Hsieh
2016-07-28  2:22 ` [PATCH v4 2/4] drm/mediatek: Add GAMMA " Bibby Hsieh
2016-07-28  2:22 ` [PATCH v4 3/4] drm/mediatek: Add gamma correction Bibby Hsieh
2016-08-11  7:32   ` Philipp Zabel
2016-08-11  7:44     ` Ville Syrjälä
2016-08-11  7:51       ` Philipp Zabel [this message]
2016-08-11  8:02         ` Ville Syrjälä
2016-08-11  8:51           ` Daniel Vetter
2016-08-11  9:11   ` [PATCH v4.5 " Philipp Zabel
2016-07-28  2:22 ` [PATCH v4 4/4] drm/mediatek: set mt8173 dithering function Bibby Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470901876.2493.24.camel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox