From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] arm64: apply __ro_after_init to some objects
Date: Thu, 11 Aug 2016 21:36:49 +0800 [thread overview]
Message-ID: <1470922609-754-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1470922609-754-1-git-send-email-jszhang@marvell.com>
These objects are set during initialization, thereafter are read only.
Previously I only want to mark vdso_pages, vdso_spec, vectors_page and
cpu_ops as __read_mostly from performance point of view. Then inspired
by Kees's patch[1] to apply more __ro_after_init for arm, I think it's
better to mark them as __ro_after_init. What's more, I find some more
objects are also read only after init. So apply __ro_after_init to all
of them.
This patch also removes global vdso_pagelist and tries to clean up
vdso_spec[] assignment code.
[1] http://www.spinics.net/lists/arm-kernel/msg523188.html
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
arch/arm64/kernel/cpu_ops.c | 2 +-
arch/arm64/kernel/kaslr.c | 2 +-
arch/arm64/kernel/vdso.c | 27 +++++++++++++--------------
arch/arm64/mm/dma-mapping.c | 2 +-
arch/arm64/mm/init.c | 4 ++--
arch/arm64/mm/mmu.c | 2 +-
6 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index c7cfb8f..6d32d1a 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -28,7 +28,7 @@ extern const struct cpu_operations smp_spin_table_ops;
extern const struct cpu_operations acpi_parking_protocol_ops;
extern const struct cpu_operations cpu_psci_ops;
-const struct cpu_operations *cpu_ops[NR_CPUS];
+const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = {
&smp_spin_table_ops,
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index 8ebabc4..93c47e1 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -20,7 +20,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
-u64 module_alloc_base __read_mostly;
+u64 module_alloc_base __ro_after_init;
u16 memstart_offset_seed __initdata;
static __init u64 get_kaslr_seed(void *fdt)
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 10ad8ab..0af41de 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -37,8 +37,7 @@
#include <asm/vdso_datapage.h>
extern char vdso_start, vdso_end;
-static unsigned long vdso_pages;
-static struct page **vdso_pagelist;
+static unsigned long vdso_pages __ro_after_init;
/*
* The vDSO data page.
@@ -53,7 +52,7 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
/*
* Create and map the vectors page for AArch32 tasks.
*/
-static struct page *vectors_page[1];
+static struct page *vectors_page[1] __ro_after_init;
static int __init alloc_vectors_page(void)
{
@@ -110,11 +109,19 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
}
#endif /* CONFIG_COMPAT */
-static struct vm_special_mapping vdso_spec[2];
+static struct vm_special_mapping vdso_spec[2] __ro_after_init = {
+ {
+ .name = "[vvar]",
+ },
+ {
+ .name = "[vdso]",
+ },
+};
static int __init vdso_init(void)
{
int i;
+ struct page **vdso_pagelist;
if (memcmp(&vdso_start, "\177ELF", 4)) {
pr_err("vDSO is not a valid ELF object!\n");
@@ -138,16 +145,8 @@ static int __init vdso_init(void)
for (i = 0; i < vdso_pages; i++)
vdso_pagelist[i + 1] = pfn_to_page(PHYS_PFN(__pa(&vdso_start)) + i);
- /* Populate the special mapping structures */
- vdso_spec[0] = (struct vm_special_mapping) {
- .name = "[vvar]",
- .pages = vdso_pagelist,
- };
-
- vdso_spec[1] = (struct vm_special_mapping) {
- .name = "[vdso]",
- .pages = &vdso_pagelist[1],
- };
+ vdso_spec[0].pages = vdso_pagelist;
+ vdso_spec[1].pages = &vdso_pagelist[1];
return 0;
}
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index c4284c4..59d44e7 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -30,7 +30,7 @@
#include <asm/cacheflush.h>
-static int swiotlb __read_mostly;
+static int swiotlb __ro_after_init;
static pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot,
bool coherent)
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index bbb7ee7..e8b81ea 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -55,8 +55,8 @@
* executes, which assigns it its actual value. So use a default value
* that cannot be mistaken for a real physical address.
*/
-s64 memstart_addr __read_mostly = -1;
-phys_addr_t arm64_dma_phys_limit __read_mostly;
+s64 memstart_addr __ro_after_init = -1;
+phys_addr_t arm64_dma_phys_limit __ro_after_init;
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 4989948..6029bed 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -46,7 +46,7 @@
u64 idmap_t0sz = TCR_T0SZ(VA_BITS);
-u64 kimage_voffset __read_mostly;
+u64 kimage_voffset __ro_after_init;
EXPORT_SYMBOL(kimage_voffset);
/*
--
2.8.1
next prev parent reply other threads:[~2016-08-11 13:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 13:36 [PATCH v2 0/4] arm64: put objects into proper sections Jisheng Zhang
2016-08-11 13:36 ` [PATCH v2 1/4] arm64: vdso: add __init section marker to alloc_vectors_page Jisheng Zhang
2016-08-11 13:36 ` [PATCH v2 2/4] arm64: vdso: constify vm_special_mapping used for aarch32 vectors page Jisheng Zhang
2016-08-11 13:36 ` [PATCH v2 3/4] arm64: kaslr: Fix incorrect placement of __initdata and __read_mostly Jisheng Zhang
2016-08-11 13:36 ` Jisheng Zhang [this message]
2016-08-11 15:05 ` [PATCH v2 4/4] arm64: apply __ro_after_init to some objects Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470922609-754-5-git-send-email-jszhang@marvell.com \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).