linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: pawel.moll@arm.com (Pawel Moll)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] bus: arm-ccn: Fix PMU handling of MN
Date: Fri, 12 Aug 2016 17:25:52 +0100	[thread overview]
Message-ID: <1471019156-5485-2-git-send-email-pawel.moll@arm.com> (raw)
In-Reply-To: <1471019156-5485-1-git-send-email-pawel.moll@arm.com>

The "Miscellaneous Node" fell through cracks of node initialisation,
as its ID is shared with HN-I.

This patch treats MN as a special case (which it is), adding separate
validation check for it and pre-defining the node ID in relevant events
descriptions. That way one can simply run:

	# perf stat -a -e ccn/mn_ecbarrier/ <workload>

Additionally, direction in the MN pseudo-events XP watchpoint
definitions is corrected to be "TX" (1) as they are defined from the
crosspoint point of view (thus barriers are transmitted from XP to MN).

Cc: stable at vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
---
 drivers/bus/arm-ccn.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 97a9185..a11b9bb 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -187,6 +187,7 @@ struct arm_ccn {
 	struct arm_ccn_component *xp;
 
 	struct arm_ccn_dt dt;
+	int mn_id;
 };
 
 static DEFINE_MUTEX(arm_ccn_mutex);
@@ -328,6 +329,7 @@ struct arm_ccn_pmu_event {
 static ssize_t arm_ccn_pmu_event_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
 	struct arm_ccn_pmu_event *event = container_of(attr,
 			struct arm_ccn_pmu_event, attr);
 	ssize_t res;
@@ -354,6 +356,9 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
 			res += snprintf(buf + res, PAGE_SIZE - res,
 					",cmp_l=?,cmp_h=?,mask=?");
 		break;
+	case CCN_TYPE_MN:
+		res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
+		break;
 	default:
 		res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
 		break;
@@ -383,9 +388,9 @@ static umode_t arm_ccn_pmu_events_is_visible(struct kobject *kobj,
 }
 
 static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
-	CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
-	CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
+	CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
 	CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
 	CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
@@ -759,6 +764,12 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
 
 	/* Validate node/xp vs topology */
 	switch (type) {
+	case CCN_TYPE_MN:
+		if (node_xp != ccn->mn_id) {
+			dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
+			return -EINVAL;
+		}
+		break;
 	case CCN_TYPE_XP:
 		if (node_xp >= ccn->num_xps) {
 			dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
@@ -1361,6 +1372,8 @@ static int arm_ccn_init_nodes(struct arm_ccn *ccn, int region,
 
 	switch (type) {
 	case CCN_TYPE_MN:
+		ccn->mn_id = id;
+		return 0;
 	case CCN_TYPE_DT:
 		return 0;
 	case CCN_TYPE_XP:
-- 
2.7.4

  reply	other threads:[~2016-08-12 16:25 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-12 16:25 [PATCH 0/5] CCN fixes for 4.8 Pawel Moll
2016-08-12 16:25 ` Pawel Moll [this message]
2016-08-12 16:25 ` [PATCH 2/5] bus: arm-ccn: Do not attempt to configure XPs for cycle counter Pawel Moll
2016-08-12 16:25 ` [PATCH 3/5] bus: arm-ccn: Fix XP watchpoint settings bitmask Pawel Moll
2016-08-12 16:25 ` [PATCH 4/5] bus: arm-ccn: Correct required arguments for XP PMU events Pawel Moll
2016-08-12 16:25 ` [PATCH 5/5] bus: arm-ccn: Add missing event attribute exclusions for host/guest Pawel Moll
2016-09-02 14:01 ` [PATCH 0/5] CCN fixes for 4.8 Arnd Bergmann
2016-09-02 14:07   ` Pawel Moll
2016-09-02 14:12     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1471019156-5485-2-git-send-email-pawel.moll@arm.com \
    --to=pawel.moll@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).