[PATCH v3 2/4] dt-bindings: pwm: Add bindings for Meson PWM Controller

[narmstrong@baylibre.com (Neil Armstrong)]

Add bindings for the Amlogic PWM Controller in Meson8b and GXBB SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/pwm/pwm-meson.txt | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt

diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
new file mode 100644
index 0000000..e06aed0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
@@ -0,0 +1,21 @@
+Amlogic Meson PWM Controller
+=================================
+
+Required properties:
+- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm".
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+  the cells format.
+
+Optional properties:
+- clocks: Could contain one or two parents clocks phandle for each of the two pwm channels.
+- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
+
+Example:
+pwm_ab: pwm at 8550 {
+	compatible = "amlogic,meson-gxbb-pwm";
+	reg = <0x0 0x08550 0x0 0x10>;
+	#pwm-cells = <3>;
+	status = "disabled";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+}
-- 
1.9.1