linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hs.liao@mediatek.com (HS Liao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v13 4/4] CMDQ: save more energy in idle
Date: Wed, 24 Aug 2016 11:27:32 +0800	[thread overview]
Message-ID: <1472009252-1074-5-git-send-email-hs.liao@mediatek.com> (raw)
In-Reply-To: <1472009252-1074-1-git-send-email-hs.liao@mediatek.com>

Use clk_disable_unprepare instead of clk_disable to save more energy
when CMDQ is idle.

Signed-off-by: HS Liao <hs.liao@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq.c | 54 +++++++++++++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq.c b/drivers/soc/mediatek/mtk-cmdq.c
index 7ca3113..a0fcbef 100644
--- a/drivers/soc/mediatek/mtk-cmdq.c
+++ b/drivers/soc/mediatek/mtk-cmdq.c
@@ -28,6 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/suspend.h>
 #include <linux/timer.h>
+#include <linux/workqueue.h>
 #include <soc/mediatek/cmdq.h>
 
 #define CMDQ_THR_MAX_COUNT		3 /* main, sub, general(misc) */
@@ -128,10 +129,16 @@ struct cmdq_task {
 	struct cmdq_task_cb	cb;
 };
 
+struct cmdq_clk_release {
+	struct cmdq		*cmdq;
+	struct work_struct	release_work;
+};
+
 struct cmdq {
 	struct mbox_controller	mbox;
 	void __iomem		*base;
 	u32			irq;
+	struct workqueue_struct	*clk_release_wq;
 	struct cmdq_thread	thread[CMDQ_THR_MAX_COUNT];
 	struct mutex		task_mutex;
 	struct clk		*clock;
@@ -297,11 +304,19 @@ static void cmdq_thread_wait_end(struct cmdq_thread *thread,
 static void cmdq_task_exec(struct cmdq_task *task, struct cmdq_thread *thread)
 {
 	struct cmdq *cmdq = task->cmdq;
-	unsigned long curr_pa, end_pa;
+	unsigned long curr_pa, end_pa, flags;
 
 	task->thread = thread;
 	if (list_empty(&thread->task_busy_list)) {
-		WARN_ON(clk_enable(cmdq->clock) < 0);
+		/*
+		 * Unlock for clk prepare (sleeping function).
+		 * We are safe to do that since we have task_mutex and
+		 * only flush will add task.
+		 */
+		spin_unlock_irqrestore(&thread->chan->lock, flags);
+		WARN_ON(clk_prepare_enable(cmdq->clock) < 0);
+		spin_lock_irqsave(&thread->chan->lock, flags);
+
 		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
 
 		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
@@ -383,6 +398,26 @@ static void cmdq_task_handle_error(struct cmdq_task *task)
 	cmdq_thread_resume(thread);
 }
 
+static void cmdq_clk_release_work(struct work_struct *work_item)
+{
+	struct cmdq_clk_release *clk_release = container_of(work_item,
+			struct cmdq_clk_release, release_work);
+	struct cmdq *cmdq = clk_release->cmdq;
+
+	clk_disable_unprepare(cmdq->clock);
+	kfree(clk_release);
+}
+
+static void cmdq_clk_release_schedule(struct cmdq *cmdq)
+{
+	struct cmdq_clk_release *clk_release;
+
+	clk_release = kmalloc(sizeof(*clk_release), GFP_ATOMIC);
+	clk_release->cmdq = cmdq;
+	INIT_WORK(&clk_release->release_work, cmdq_clk_release_work);
+	queue_work(cmdq->clk_release_wq, &clk_release->release_work);
+}
+
 static void cmdq_thread_irq_handler(struct cmdq *cmdq,
 				    struct cmdq_thread *thread)
 {
@@ -432,7 +467,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
 
 	if (list_empty(&thread->task_busy_list)) {
 		cmdq_thread_disable(cmdq, thread);
-		clk_disable(cmdq->clock);
+		cmdq_clk_release_schedule(cmdq);
 	} else {
 		mod_timer(&thread->timeout,
 			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
@@ -491,7 +526,7 @@ static void cmdq_thread_handle_timeout(unsigned long data)
 
 	cmdq_thread_resume(thread);
 	cmdq_thread_disable(cmdq, thread);
-	clk_disable(cmdq->clock);
+	cmdq_clk_release_schedule(cmdq);
 	spin_unlock_irqrestore(&thread->chan->lock, flags);
 }
 
@@ -779,7 +814,7 @@ static int cmdq_suspend(struct device *dev)
 		msleep(20);
 	}
 
-	clk_unprepare(cmdq->clock);
+	flush_workqueue(cmdq->clk_release_wq);
 	return 0;
 }
 
@@ -787,7 +822,6 @@ static int cmdq_resume(struct device *dev)
 {
 	struct cmdq *cmdq = dev_get_drvdata(dev);
 
-	WARN_ON(clk_prepare(cmdq->clock) < 0);
 	cmdq->suspended = false;
 	return 0;
 }
@@ -796,8 +830,8 @@ static int cmdq_remove(struct platform_device *pdev)
 {
 	struct cmdq *cmdq = platform_get_drvdata(pdev);
 
+	destroy_workqueue(cmdq->clk_release_wq);
 	mbox_controller_unregister(&cmdq->mbox);
-	clk_unprepare(cmdq->clock);
 	return 0;
 }
 
@@ -916,8 +950,12 @@ static int cmdq_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	cmdq->clk_release_wq = alloc_ordered_workqueue(
+			"%s", WQ_MEM_RECLAIM | WQ_HIGHPRI,
+			"cmdq_clk_release");
+
 	platform_set_drvdata(pdev, cmdq);
-	WARN_ON(clk_prepare(cmdq->clock) < 0);
+
 	return 0;
 }
 
-- 
1.9.1

  parent reply	other threads:[~2016-08-24  3:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-24  3:27 [PATCH v13 0/4] Mediatek MT8173 CMDQ support HS Liao
2016-08-24  3:27 ` [PATCH v13 1/4] dt-bindings: soc: Add documentation for the MediaTek GCE unit HS Liao
2016-08-24  3:27 ` [PATCH v13 2/4] CMDQ: Mediatek CMDQ driver HS Liao
2016-08-24  3:27 ` [PATCH v13 3/4] arm64: dts: mt8173: Add GCE node HS Liao
2016-08-24  3:27 ` HS Liao [this message]
2016-08-24 11:00 ` [PATCH v13 0/4] Mediatek MT8173 CMDQ support Matthias Brugger
2016-08-25 13:37   ` Horng-Shyang Liao
2016-08-25 13:42     ` Jassi Brar
2016-08-31  8:13       ` Horng-Shyang Liao
2016-08-31  8:45         ` Jassi Brar
2016-09-02  8:50           ` Horng-Shyang Liao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472009252-1074-5-git-send-email-hs.liao@mediatek.com \
    --to=hs.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).