From: chunfeng.yun@mediatek.com (chunfeng yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5, 0/5] Add MediaTek USB3 DRD Driver
Date: Wed, 24 Aug 2016 14:42:03 +0800 [thread overview]
Message-ID: <1472020923.27677.1.camel@mhfsdcap03> (raw)
In-Reply-To: <1470730998-9563-1-git-send-email-chunfeng.yun@mediatek.com>
Dear all,
Could you please help me to review the code?
Thank you very much.
On Tue, 2016-08-09 at 16:23 +0800, Chunfeng Yun wrote:
> These patches introduce the MediaTek USB3 dual-role controller
> driver.
>
> The driver can be configured as Dual-Role Device (DRD),
> Peripheral Only and Host Only (xHCI) modes. It works well
> with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
> tested on MT8173 platform which only contains USB2.0 device IP,
> and on MT6290 platform which contains USB3.0 device IP.
>
> Change in v5:
> 1. modify some comments
> 2. rename some unsuitable variables
> 3. add reg-names property for host node
> 4. add USB_MTU3_DEBUG to control debug messages
>
> Change in v4:
> 1. fix build errors on non-mediatek platforms
> 2. provide manual dual-role switch via debugfs instead of sysfs
>
> Change in v3:
> 1. fix some typo error
> 2. rename mtu3.txt to mt8173-mtu3.txt
>
> Change in v2:
> 1. modify binding docs according to suggestions
> 2. modify some comments and remove some dummy blank lines
> 3. fix memory leakage
>
>
> Chunfeng Yun (5):
> dt-bindings: mt8173-xhci: support host side of dual-role mode
> dt-bindings: mt8173-mtu3: add devicetree bindings
> usb: xhci-mtk: make IPPC register optional
> usb: Add MediaTek USB3 DRD Driver
> arm64: dts: mediatek: add USB3 DRD driver
>
> .../devicetree/bindings/usb/mt8173-mtu3.txt | 87 ++
> .../devicetree/bindings/usb/mt8173-xhci.txt | 54 +-
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 46 +-
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 29 +-
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 1 +
> drivers/usb/host/xhci-mtk.c | 36 +-
> drivers/usb/mtu3/Kconfig | 54 ++
> drivers/usb/mtu3/Makefile | 19 +
> drivers/usb/mtu3/mtu3.h | 422 ++++++++++
> drivers/usb/mtu3/mtu3_core.c | 874 +++++++++++++++++++
> drivers/usb/mtu3/mtu3_dr.c | 375 +++++++++
> drivers/usb/mtu3/mtu3_dr.h | 108 +++
> drivers/usb/mtu3/mtu3_gadget.c | 731 ++++++++++++++++
> drivers/usb/mtu3/mtu3_gadget_ep0.c | 879 ++++++++++++++++++++
> drivers/usb/mtu3/mtu3_host.c | 294 +++++++
> drivers/usb/mtu3/mtu3_hw_regs.h | 473 +++++++++++
> drivers/usb/mtu3/mtu3_plat.c | 490 +++++++++++
> drivers/usb/mtu3/mtu3_qmu.c | 599 +++++++++++++
> drivers/usb/mtu3/mtu3_qmu.h | 43 +
> 20 files changed, 5598 insertions(+), 18 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> create mode 100644 drivers/usb/mtu3/Kconfig
> create mode 100644 drivers/usb/mtu3/Makefile
> create mode 100644 drivers/usb/mtu3/mtu3.h
> create mode 100644 drivers/usb/mtu3/mtu3_core.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.h
> create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
> create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
> create mode 100644 drivers/usb/mtu3/mtu3_host.c
> create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
> create mode 100644 drivers/usb/mtu3/mtu3_plat.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
>
next prev parent reply other threads:[~2016-08-24 6:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-09 8:23 [PATCH V5, 0/5] Add MediaTek USB3 DRD Driver Chunfeng Yun
2016-08-09 8:23 ` [PATCH v5, 1/5] dt-bindings: mt8173-xhci: support host side of dual-role mode Chunfeng Yun
2016-08-09 8:23 ` [PATCH v5,2/5] dt-bindings: mt8173-mtu3: add devicetree bindings Chunfeng Yun
2016-08-09 8:23 ` [PATCH v5,3/5] usb: xhci-mtk: make IPPC register optional Chunfeng Yun
2016-08-09 8:23 ` [PATCH v5,5/5] arm64: dts: mediatek: add USB3 DRD driver Chunfeng Yun
2016-08-24 6:42 ` chunfeng yun [this message]
2016-08-24 11:29 ` [PATCH V5, 0/5] Add MediaTek USB3 DRD Driver Oliver Neukum
2016-08-25 1:40 ` chunfeng yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472020923.27677.1.camel@mhfsdcap03 \
--to=chunfeng.yun@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox