From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anson.Huang@nxp.com (Anson Huang) Date: Mon, 29 Aug 2016 23:41:12 +0800 Subject: [PATCH V2] ARM: imx: add cpuidle support for i.mx6ul Message-ID: <1472485272-17036-1-git-send-email-Anson.Huang@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch enables cpuidle driver for i.MX6UL, it reuses i.MX6SX's cpuidle driver, 3 levels of cpuidle supported: 1. ARM WFI; 2. SOC in WAIT mode; 3. SOC in WAIT mode + ARM power off. As i.MX6UL has cortex-A7 CORE with an internal L2 cache, so flushing it before powering down ARM platform is necessary, flush_cache_all() in last step of cpu_suspend has very small overhead, just call it to avoid cache type check for different platforms. Signed-off-by: Anson Huang --- changes since V1: remove L2 cache contional code, just call flush_cache_all is just fine since it has very small overhead for L1 cache flush. arch/arm/mach-imx/cpuidle-imx6sx.c | 10 ++++++++++ arch/arm/mach-imx/mach-imx6ul.c | 3 +++ 2 files changed, 13 insertions(+) diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 261aaa4..c5a5c3a 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -17,6 +18,15 @@ static int imx6sx_idle_finish(unsigned long val) { + /* + * for Cortex-A7 which has an internal L2 + * cache, need to flush it before powering + * down ARM platform, since flushing L1 cache + * here again has very small overhead, compared + * to adding conditional code for L2 cache type, + * just call flush_cache_all() is fine. + */ + flush_cache_all(); cpu_do_idle(); return 0; diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 6bb7d9c..58a2b88 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -16,6 +16,7 @@ #include #include "common.h" +#include "cpuidle.h" static void __init imx6ul_enet_clk_init(void) { @@ -80,6 +81,8 @@ static void __init imx6ul_init_irq(void) static void __init imx6ul_init_late(void) { + imx6sx_cpuidle_init(); + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } -- 1.9.1