[PATCH v2 1/2] arm64: dts: qcom: msm8916: Add Hexagon SMD edge

[PATCH v2 1/2] arm64: dts: qcom: msm8916: Add Hexagon SMD edge

[Bjorn Andersson]

Add the Hexagon SMD edge, so that QRTR is probed when the Hexagon is
booted.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Rebase ontop of linux-next

 arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 74daf89d977d..5a1b5f5b3a90 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -731,6 +731,14 @@
 				};
 			};
 		};
+
+		hexagon {
+			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,smd-edge = <0>;
+			qcom,ipc = <&apcs 8 12>;
+			qcom,remote-pid = <1>;
+		};
 	};
 
 	hexagon-smp2p {
-- 
2.5.0

[PATCH v2 2/2] arm64: dts: qcom: msm8916: Add Hexagon PIL node

[Bjorn Andersson]

The Hexagon core on the msm8916 provides services for audio control,
audio output, sensors and the Hexagon SDK. The Hexagon remoteproc node
allows us to boot this core.

Although its part of the core platform its left disabled as it will
crash without the rmtfs QMI service and we do not yet handle crashes
gracefully.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Rebase ontop of linux-next

 arch/arm64/boot/dts/qcom/msm8916.dtsi | 44 ++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5a1b5f5b3a90..f6df72da6c4d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -77,7 +77,7 @@
 			no-map;
 		};
 
-		mpss at 86800000 {
+		mpss_mem: mpss at 86800000 {
 			reg = <0x0 0x86800000 0x0 0x2b00000>;
 			no-map;
 		};
@@ -684,6 +684,48 @@
 			nvmem-cell-names = "calib", "calib_sel";
 			#thermal-sensor-cells = <1>;
 		};
+
+		hexagon at 4080000 {
+			compatible = "qcom,q6v5-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc 0 24 1>,
+					      <&hexagon_smp2p_in 0 0>,
+					      <&hexagon_smp2p_in 1 0>,
+					      <&hexagon_smp2p_in 2 0>,
+					      <&hexagon_smp2p_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>;
+			clock-names = "iface", "bus", "mem";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			mx-supply = <&pm8916_l3>;
+			pll-supply = <&pm8916_l7>;
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+		};
 	};
 
 	smd {
-- 
2.5.0