* [PATCH] arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1
@ 2016-08-31 13:10 Guodong Xu
2016-09-02 10:21 ` Wei Xu
0 siblings, 1 reply; 2+ messages in thread
From: Guodong Xu @ 2016-08-31 13:10 UTC (permalink / raw)
To: linux-arm-kernel
With these properties added, sd cards inserted into hikey can work at UHS
mode if they have such capability.
Note, this depends on HiKey UHS-SD support patch [1] to work properly.
If you didn't add this patch, but added sd-uhs- properties into dwmmc_1,
then sd cards cannot work. As of this post, patch [1] has been integrated
into maintainer's next branch [2].
[1]: [V4] mmc: dw_mmc-k3: UHS-SD card for Hisilicon Hikey,
https://patchwork.kernel.org/patch/9262515/
[2]: https://git.linaro.org/people/ulf.hansson/mmc.git next
commit a8a5b2909cfc ("mmc: dw_mmc: k3: UHS-SD card for Hisilicon Hikey")
cc: Ulf Hansson <ulf.hansson@linaro.org>
cc: Jaehoon Chung <jh80.chung@samsung.com>
cc: Jinguojun <kid.jin@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 63608e9..17839db 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -785,6 +785,9 @@
card-detect-delay = <200>;
hisilicon,peripheral-syscon = <&ao_ctrl>;
cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
reg = <0x0 0xf723e000 0x0 0x1000>;
interrupts = <0x0 0x49 0x4>;
#address-cells = <0x1>;
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1
2016-08-31 13:10 [PATCH] arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1 Guodong Xu
@ 2016-09-02 10:21 ` Wei Xu
0 siblings, 0 replies; 2+ messages in thread
From: Wei Xu @ 2016-09-02 10:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Guodong,
On 31/08/2016 14:10, Guodong Xu wrote:
> With these properties added, sd cards inserted into hikey can work at UHS
> mode if they have such capability.
>
> Note, this depends on HiKey UHS-SD support patch [1] to work properly.
> If you didn't add this patch, but added sd-uhs- properties into dwmmc_1,
> then sd cards cannot work. As of this post, patch [1] has been integrated
> into maintainer's next branch [2].
>
> [1]: [V4] mmc: dw_mmc-k3: UHS-SD card for Hisilicon Hikey,
> https://patchwork.kernel.org/patch/9262515/
> [2]: https://git.linaro.org/people/ulf.hansson/mmc.git next
> commit a8a5b2909cfc ("mmc: dw_mmc: k3: UHS-SD card for Hisilicon Hikey")
>
> cc: Ulf Hansson <ulf.hansson@linaro.org>
> cc: Jaehoon Chung <jh80.chung@samsung.com>
> cc: Jinguojun <kid.jin@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Applied to the hisi-dt-4.9 branch.
Thanks!
Best Regards,
Wei
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 63608e9..17839db 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -785,6 +785,9 @@
> card-detect-delay = <200>;
> hisilicon,peripheral-syscon = <&ao_ctrl>;
> cap-sd-highspeed;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> reg = <0x0 0xf723e000 0x0 0x1000>;
> interrupts = <0x0 0x49 0x4>;
> #address-cells = <0x1>;
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-02 10:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-31 13:10 [PATCH] arm64: dts: hi6220: add sd-uhs- properties into dwmmc_1 Guodong Xu
2016-09-02 10:21 ` Wei Xu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).