From mboxrd@z Thu Jan 1 00:00:00 1970 From: rui.zhang@intel.com (Zhang Rui) Date: Tue, 06 Sep 2016 08:24:07 +0800 Subject: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node. In-Reply-To: <1471492253-7185-4-git-send-email-dawei.chien@mediatek.com> References: <1471492253-7185-1-git-send-email-dawei.chien@mediatek.com> <1471492253-7185-4-git-send-email-dawei.chien@mediatek.com> Message-ID: <1473121447.2201.20.camel@intel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On ?, 2016-08-18 at 11:50 +0800, Dawei Chien wrote: > This adds the thermal controller and auxadc nodes > to the Mediatek MT2701 dtsi file. > > Signed-off-by: Dawei Chien > --- > This patch depned on: > https://patchwork.kernel.org/patch/9249589/ > https://patchwork.kernel.org/patch/9249589/ Hmm, does this mean that I should take all these three patches and hold the patches in next merge window until the above patch has been merged? thanks, rui? > --- > ?arch/arm/boot/dts/mt2701.dtsi |???44 > +++++++++++++++++++++++++++++++++++++++++ > ?1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/mt2701.dtsi > b/arch/arm/boot/dts/mt2701.dtsi > index e9150a4..cee4724 100644 > --- a/arch/arm/boot/dts/mt2701.dtsi > +++ b/arch/arm/boot/dts/mt2701.dtsi > @@ -87,6 +87,36 @@ > ? clock-output-names = "rtc32k"; > ? }; > ? > + thermal-zones { > + cpu_thermal: cpu_thermal { > + polling-delay-passive = <1000>; /* > milliseconds */ > + polling-delay = <1000>; /* milliseconds */ > + > + thermal-sensors = <&thermal 0>; > + sustainable-power = <1000>; > + > + trips { > + threshold: trip-point at 0 { > + temperature = <68000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + target: trip-point at 1 { > + temperature = <85000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_crit: cpu_crit at 0 { > + temperature = <115000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > ? timer { > ? compatible = "arm,armv7-timer"; > ? interrupt-parent = <&gic>; > @@ -222,4 +252,18 @@ > ? clock-names = "baud", "bus"; > ? status = "disabled"; > ? }; > + > + thermal: thermal at 1100b000 { > + #thermal-sensor-cells = <0>; > + compatible = "mediatek,mt2701-thermal"; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = ; > + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg > CLK_PERI_AUXADC>; > + clock-names = "therm", "auxadc"; > + resets = <&pericfg 0x10>; > + reset-names = "therm"; > + mediatek,auxadc = <&auxadc>; > + mediatek,apmixedsys = <&apmixedsys>; > + }; > + > ?};