From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] mtd: nand: sunxi: switch from manual to automated timing config
Date: Tue, 6 Sep 2016 12:39:13 +0200 [thread overview]
Message-ID: <1473158355-22451-6-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1473158355-22451-1-git-send-email-s.hauer@pengutronix.de>
The NAND framework is now able to select the best NAND timings for us.
All we have to do is implement a ->setup_data_interface() function to
apply those timings and remove the timing selection code from the sunxi
driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mtd/nand/sunxi_nand.c | 77 +++++++++----------------------------------
1 file changed, 15 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index e414b31..ee42b8c 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1572,14 +1572,23 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
#define sunxi_nand_lookup_timing(l, p, c) \
_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
-static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
- const struct nand_sdr_timings *timings)
+static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd,
+ const struct nand_data_interface *conf,
+ bool check_only)
{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nand_chip *chip = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
+ const struct nand_sdr_timings *timings;
u32 min_clk_period = 0;
s32 tWB, tADL, tWHR, tRHW, tCAD;
long real_clk_rate;
+ if (conf->type != NAND_SDR_IFACE)
+ return -ENOTSUPP;
+
+ timings = &conf->timings.sdr;
+
/* T1 <=> tCLS */
if (timings->tCLS_min > min_clk_period)
min_clk_period = timings->tCLS_min;
@@ -1679,6 +1688,9 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
return tRHW;
}
+ if (check_only)
+ return 0;
+
/*
* TODO: according to ONFI specs this value only applies for DDR NAND,
* but Allwinner seems to set this to 0x7. Mimic them for now.
@@ -1712,44 +1724,6 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
return 0;
}
-static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
- struct device_node *np)
-{
- struct mtd_info *mtd = nand_to_mtd(&chip->nand);
- const struct nand_sdr_timings *timings;
- int ret;
- int mode;
-
- mode = onfi_get_async_timing_mode(&chip->nand);
- if (mode == ONFI_TIMING_MODE_UNKNOWN) {
- mode = chip->nand.onfi_timing_mode_default;
- } else {
- uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
- int i;
-
- mode = fls(mode) - 1;
- if (mode < 0)
- mode = 0;
-
- feature[0] = mode;
- for (i = 0; i < chip->nsels; i++) {
- chip->nand.select_chip(mtd, i);
- ret = chip->nand.onfi_set_features(mtd, &chip->nand,
- ONFI_FEATURE_ADDR_TIMING_MODE,
- feature);
- chip->nand.select_chip(mtd, -1);
- if (ret)
- return ret;
- }
- }
-
- timings = onfi_async_timing_mode_to_sdr_timings(mode);
- if (IS_ERR(timings))
- return PTR_ERR(timings);
-
- return sunxi_nand_chip_set_timings(chip, timings);
-}
-
static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -1975,7 +1949,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
struct device_node *np)
{
- const struct nand_sdr_timings *timings;
struct sunxi_nand_chip *chip;
struct mtd_info *mtd;
struct nand_chip *nand;
@@ -2065,25 +2038,11 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
nand->read_buf = sunxi_nfc_read_buf;
nand->write_buf = sunxi_nfc_write_buf;
nand->read_byte = sunxi_nfc_read_byte;
+ nand->setup_data_interface = sunxi_nfc_setup_data_interface;
mtd = nand_to_mtd(nand);
mtd->dev.parent = dev;
- timings = onfi_async_timing_mode_to_sdr_timings(0);
- if (IS_ERR(timings)) {
- ret = PTR_ERR(timings);
- dev_err(dev,
- "could not retrieve timings for ONFI mode 0: %d\n",
- ret);
- return ret;
- }
-
- ret = sunxi_nand_chip_set_timings(chip, timings);
- if (ret) {
- dev_err(dev, "could not configure chip timings: %d\n", ret);
- return ret;
- }
-
ret = nand_scan_ident(mtd, nsels, NULL);
if (ret)
return ret;
@@ -2096,12 +2055,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
nand->options |= NAND_SUBPAGE_READ;
- ret = sunxi_nand_chip_init_timings(chip, np);
- if (ret) {
- dev_err(dev, "could not configure chip timings: %d\n", ret);
- return ret;
- }
-
ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
if (ret) {
dev_err(dev, "ECC init failed: %d\n", ret);
--
2.8.1
next prev parent reply other threads:[~2016-09-06 10:39 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 10:39 [PATCH v2] mtd: nand: automate NAND timings selection Sascha Hauer
2016-09-06 10:39 ` [PATCH 1/7] mtd: nand: Create a NAND reset function Sascha Hauer
2016-09-06 11:18 ` Boris Brezillon
2016-09-06 13:02 ` Sascha Hauer
2016-09-06 13:06 ` Boris Brezillon
2016-09-06 10:39 ` [PATCH 2/7] mtd: nand: Introduce nand_data_interface Sascha Hauer
2016-09-06 11:21 ` Boris Brezillon
2016-09-06 13:34 ` Sascha Hauer
2016-09-06 13:46 ` Boris Brezillon
2016-09-06 14:09 ` Sascha Hauer
2016-09-06 10:39 ` [PATCH 3/7] mtd: nand: convert ONFI mode into data interface Sascha Hauer
2016-09-06 11:27 ` Boris Brezillon
2016-09-06 12:15 ` Boris Brezillon
2016-09-06 10:39 ` [PATCH 4/7] mtd: nand: automate NAND timings selection Sascha Hauer
2016-09-06 11:58 ` Boris Brezillon
2016-09-06 14:08 ` Sascha Hauer
2016-09-06 14:50 ` Boris Brezillon
2016-09-06 15:04 ` Sascha Hauer
2016-09-06 15:15 ` Boris Brezillon
2016-09-06 10:39 ` Sascha Hauer [this message]
2016-09-06 12:01 ` [PATCH 5/7] mtd: nand: sunxi: switch from manual to automated timing config Boris Brezillon
2016-09-06 10:39 ` [PATCH 6/7] mtd: nand: mxc: implement onfi get/set features Sascha Hauer
2016-09-06 12:05 ` Boris Brezillon
2016-09-06 12:47 ` Sascha Hauer
2016-09-06 12:52 ` Boris Brezillon
2016-09-06 10:39 ` [PATCH 7/7] mtd: nand: mxc: Add timing setup for v2 controllers Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473158355-22451-6-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).