From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe.montjoie@gmail.com (Corentin Labbe) Date: Fri, 9 Sep 2016 14:45:12 +0200 Subject: [PATCH v3 4/9] ARM: dts: sun8i-h3: Add dt node for the syscon control module In-Reply-To: <1473425117-18645-1-git-send-email-clabbe.montjoie@gmail.com> References: <1473425117-18645-1-git-send-email-clabbe.montjoie@gmail.com> Message-ID: <1473425117-18645-5-git-send-email-clabbe.montjoie@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch add the dt node for the syscon register present on the Allwinner H3. Only two register are present in this syscon and the only one useful is the one dedicated to EMAC clock. Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fdf9fdb..a39da6f 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -140,6 +140,11 @@ #size-cells = <1>; ranges; + syscon: syscon at 01c00000 { + compatible = "syscon"; + reg = <0x01c00000 0x34>; + }; + dma: dma-controller at 01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; -- 2.7.3