linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jbrunet@baylibre.com (jbrunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] ARM: amlogic: Add spifc support to Amlogic's GXBB family
Date: Tue, 13 Sep 2016 10:03:27 +0200	[thread overview]
Message-ID: <1473753807.2662.12.camel@baylibre.com> (raw)
In-Reply-To: <7heg4oq2es.fsf@baylibre.com>

On Mon, 2016-09-12 at 13:38 -0700, Kevin Hilman wrote:
> Jerome Brunet <jbrunet@baylibre.com> writes:
> 
> > 
> > This patch series adds the necessary pins, clocks and device tree
> > nodes to
> > enable the spifc controller on the GXBB family. I had to add the
> > nand pins
> > in pintctrl as the pinmux setting left by u-boot was conflicting
> > with the
> > spifc pinmux during my test on the P200.
> 
> This series seems to be missing a patch which enables the SPIfc on
> the
> P200 board for use with the on-board NOR flash.
> 
> Kevin
> 

Indeed, I did not provide this patch, on purpose.
The SPI-NOR at 4U2 on the P200 schematics was not present on the board
I have. I assumed this was the case for all other P200 as well.

In addition, to enable the SPI-NOR, you would also need to solder
something at 4R3 (SPI_CS signal disconnected by default)

Finally, all the SPIfc lines are shared with the NAND controller which,
like the SPI-NOR, appears on the schematics (4CCN1) but is not soldered
on the actual hardware.

Of course, I can share such patch for testing purposes if you would
like me to.

Jerome.

> > 
> > Changes since v1 at : http://lkml.kernel.org/r/1473261223-15412-1-g
> > it-send-email-jbrunet at baylibre.com
> > ?* Omit patches :
> > ? - dt-bindings: spi-meson: Add GXBB Compatible string
> > ? - spi: meson: Add GXBB compatible
> > ? Sent as dedicated series
> > ?* Omit patch:
> > ? - clk: gxbb: expose spifc clock
> > ? Already applied
> > ?* Rename SPI flash controller pins from spifc_* to nor_* to keep
> > the
> > ???name aligned with the datasheet
> > 
> > Jerome Brunet (3):
> > ? pinctrl: amlogic: gxbb: add spi nor pins
> > ? pinctrl: amlogic: gxbb: add nand pins
> > ? ARM64: dts: amlogic: add spi nor pins
> > 
> > Neil Armstrong (1):
> > ? ARM64: dts: meson-gxbb: Add SPIFC node
> > 
> > ?arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 19 +++++++++++++++
> > ?drivers/pinctrl/meson/pinctrl-meson-gxbb.c??| 37
> > +++++++++++++++++++++++++++++
> > ?2 files changed, 56 insertions(+)

  reply	other threads:[~2016-09-13  8:03 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-09  8:28 [PATCH v2 0/4] ARM: amlogic: Add spifc support to Amlogic's GXBB family Jerome Brunet
2016-09-09  8:28 ` [PATCH v2 1/4] pinctrl: amlogic: gxbb: add spi nor pins Jerome Brunet
2016-09-12 17:51   ` Kevin Hilman
2016-09-13 11:36   ` Linus Walleij
2016-09-09  8:28 ` [PATCH v2 2/4] pinctrl: amlogic: gxbb: add nand pins Jerome Brunet
2016-09-09  8:28 ` [PATCH v2 3/4] ARM64: dts: amlogic: add spi nor pins Jerome Brunet
2016-09-12 17:51   ` Kevin Hilman
2016-09-09  8:28 ` [PATCH v2 4/4] ARM64: dts: meson-gxbb: Add SPIFC node Jerome Brunet
2016-09-12 17:51   ` Kevin Hilman
2016-09-12 20:38 ` [PATCH v2 0/4] ARM: amlogic: Add spifc support to Amlogic's GXBB family Kevin Hilman
2016-09-13  8:03   ` jbrunet [this message]
2016-09-13 14:19     ` Kevin Hilman
2016-09-13 15:12 ` [RESEND PATCH v2 1/4] pinctrl: amlogic: gxbb: add spi nor pins Jerome Brunet
2016-09-13 15:12   ` [RESEND PATCH v2 2/4] pinctrl: amlogic: gxbb: add nand pins Jerome Brunet
2016-09-15 12:15     ` Linus Walleij
2016-09-15 12:06   ` [RESEND PATCH v2 1/4] pinctrl: amlogic: gxbb: add spi nor pins Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473753807.2662.12.camel@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).