From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 7/8] arm64: move sp_el0 and tpidr_el1 into cpu_suspend_ctx
Date: Thu, 15 Sep 2016 14:49:08 +0100 [thread overview]
Message-ID: <1473947349-14521-8-git-send-email-mark.rutland@arm.com> (raw)
In-Reply-To: <1473947349-14521-1-git-send-email-mark.rutland@arm.com>
When returning from idle, we rely on the fact that thread_info lives at
the end of the kernel stack, and restore this by masking the saved stack
pointer. Subsequent patches will sever the relationship between the
stack and thread_info, and to cater for this we must save/restore sp_el0
explicitly, storing it in cpu_suspend_ctx.
As cpu_suspend_ctx must be doubleword aligned, this leaves us with an
extra slot in cpu_suspend_ctx. We can use this to save/restore tpidr_el1
in the same way, which simplifies the code, avoiding pointer chasing on
the restore path (as we no longer need to load thread_info::cpu followed
by the relevant slot in __per_cpu_offset based on this).
This patch stashes both registers in cpu_suspend_ctx.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
arch/arm64/include/asm/suspend.h | 2 +-
arch/arm64/kernel/sleep.S | 3 ---
arch/arm64/kernel/suspend.c | 6 ------
arch/arm64/mm/proc.S | 6 ++++++
4 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
index 024d623..92d6a62 100644
--- a/arch/arm64/include/asm/suspend.h
+++ b/arch/arm64/include/asm/suspend.h
@@ -1,7 +1,7 @@
#ifndef __ASM_SUSPEND_H
#define __ASM_SUSPEND_H
-#define NR_CTX_REGS 10
+#define NR_CTX_REGS 12
#define NR_CALLEE_SAVED_REGS 12
/*
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index ccf79d8..74e6e19 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -132,9 +132,6 @@ ENTRY(_cpu_resume)
/* load sp from context */
ldr x2, [x0, #CPU_CTX_SP]
mov sp, x2
- /* save thread_info */
- and x2, x2, #~(THREAD_SIZE - 1)
- msr sp_el0, x2
/*
* cpu_do_resume expects x0 to contain context address pointer
*/
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index b616e365..9c33a49 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -42,12 +42,6 @@ void notrace __cpu_suspend_exit(void)
cpu_uninstall_idmap();
/*
- * Restore per-cpu offset before any kernel
- * subsystem relying on it has a chance to run.
- */
- set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
-
- /*
* Restore HW breakpoint registers to sane values
* before debug exceptions are possibly reenabled
* through local_dbg_restore.
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 5bb61de..0293db1 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -70,11 +70,14 @@ ENTRY(cpu_do_suspend)
mrs x8, mdscr_el1
mrs x9, oslsr_el1
mrs x10, sctlr_el1
+ mrs x11, tpidr_el1
+ mrs x12, sp_el0
stp x2, x3, [x0]
stp x4, xzr, [x0, #16]
stp x5, x6, [x0, #32]
stp x7, x8, [x0, #48]
stp x9, x10, [x0, #64]
+ stp x11, x12, [x0, #80]
ret
ENDPROC(cpu_do_suspend)
@@ -89,6 +92,7 @@ ENTRY(cpu_do_resume)
ldp x6, x8, [x0, #32]
ldp x9, x10, [x0, #48]
ldp x11, x12, [x0, #64]
+ ldp x13, x14, [x0, #80]
msr tpidr_el0, x2
msr tpidrro_el0, x3
msr contextidr_el1, x4
@@ -102,6 +106,8 @@ ENTRY(cpu_do_resume)
msr vbar_el1, x9
msr mdscr_el1, x10
msr sctlr_el1, x12
+ msr tpidr_el1, x13
+ msr sp_el0, x14
/*
* Restore oslsr_el1 by writing oslar_el1
*/
--
1.9.1
next prev parent reply other threads:[~2016-09-15 13:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-15 13:49 [RFC PATCH 0/8] arm64: move thread_info off of the task stack Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 1/8] thread_info: include <current.h> for THREAD_INFO_IN_TASK Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 2/8] thread_info: allow custom in-task thread_info Mark Rutland
2016-09-15 18:37 ` Andy Lutomirski
2016-09-16 10:33 ` Mark Rutland
2016-09-16 15:11 ` Andy Lutomirski
2016-09-19 10:44 ` Mark Rutland
2016-09-21 10:28 ` Mark Rutland
2016-09-22 22:23 ` Andy Lutomirski
2016-09-23 17:31 ` Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 3/8] arm64: thread_info remove stale items Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 4/8] arm64: asm-offsets: remove unused definitions Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 5/8] arm64: assembler: introduce ldr_this_cpu Mark Rutland
2016-09-15 13:49 ` [RFC PATCH 6/8] arm64: traps: use task_struct instead of thread_info Mark Rutland
2016-09-15 13:49 ` Mark Rutland [this message]
2016-09-15 13:49 ` [RFC PATCH 8/8] arm64: split thread_info from task stack Mark Rutland
2016-09-21 1:26 ` [RFC PATCH 0/8] arm64: move thread_info off of the " Laura Abbott
2016-09-21 10:31 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473947349-14521-8-git-send-email-mark.rutland@arm.com \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).