From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.torgue@st.com (Alexandre TORGUE) Date: Thu, 15 Sep 2016 18:42:34 +0200 Subject: [PATCH 02/11] DOCUMENTATION: dt-bindings: Document the STM32 USART bindings In-Reply-To: <1473957763-30629-1-git-send-email-alexandre.torgue@st.com> References: <1473957763-30629-1-git-send-email-alexandre.torgue@st.com> Message-ID: <1473957763-30629-3-git-send-email-alexandre.torgue@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds documentation of device tree bindings for the STM32 USART Signed-off-by: Maxime Coquelin Signed-off-by: Alexandre TORGUE diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt new file mode 100644 index 0000000..75b1400 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -0,0 +1,34 @@ +* STMicroelectronics STM32 USART + +Required properties: +- compatible: Can be either "st,stm32-usart", "st,stm32-uart", +"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether +the device supports synchronous mode and is compatible with +stm32(f4) or stm32f7. +- reg: The address and length of the peripheral registers space +- interrupts: The interrupt line of the USART instance +- clocks: The input clock of the USART instance + +Optional properties: +- pinctrl: The reference on the pins configuration +- st,hw-flow-ctrl: bool flag to enable hardware flow control. + +Examples: +usart4: serial at 40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&clk_pclk1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart4>; +}; + +usart2: serial at 40004400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&clk_pclk1>; + st,hw-flow-ctrl; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; +}; -- 1.9.1