[PATCH 2/2] clk: imx6: initialize GPU clocks

[l.stach@pengutronix.de (Lucas Stach)]

Initialize the GPU clock muxes to sane inputs. Until now they have
not been changed from their default values, which means that both
GPU3D shader and GPU2D core were fed by clock inputs whose rates
exceed the maximium allowed frequency of the cores by as much as
200MHz.

This fixes a severe GPU stability issue on i.MX6DL.

Cc: stable at vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/clk/imx/clk-imx6q.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 64c243173395..751c3e7d5843 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -633,6 +633,24 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
 		clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
 
+	/*
+	 * Initialize the GPU clock muxes, so that the maximum specified clock
+	 * rates for the respective SoC are not exceeded.
+	 */
+	if (clk_on_imx6dl()) {
+		clk_set_parent(clk[IMX6QDL_CLK_GPU3D_CORE_SEL],
+		               clk[IMX6QDL_CLK_PLL2_PFD1_594M]);
+		clk_set_parent(clk[IMX6QDL_CLK_GPU2D_CORE_SEL],
+		               clk[IMX6QDL_CLK_PLL2_PFD1_594M]);
+	} else if (clk_on_imx6q()) {
+		clk_set_parent(clk[IMX6QDL_CLK_GPU3D_CORE_SEL],
+		               clk[IMX6QDL_CLK_MMDC_CH0_AXI]);
+		clk_set_parent(clk[IMX6QDL_CLK_GPU3D_SHADER_SEL],
+		               clk[IMX6QDL_CLK_PLL2_PFD1_594M]);
+		clk_set_parent(clk[IMX6QDL_CLK_GPU2D_CORE_SEL],
+		               clk[IMX6QDL_CLK_PLL3_USB_OTG]);
+	}
+
 	imx_register_uart_clocks(uart_clks);
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
-- 
2.8.1