linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] pinctrl: nomadik: don't default-flag IRQs as falling
@ 2016-09-19  8:22 Linus Walleij
  2016-09-19  8:50 ` Marc Zyngier
  0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2016-09-19  8:22 UTC (permalink / raw)
  To: linux-arm-kernel

There is no point in adding any default trigger for these
GPIO interrupts: the device tree should contain all trigger
information and the platforms using the driver boots
exclusively from device tree.

Also the boot log is nagging me to fix this:

[    0.771057] ------------[ cut here ]------------
[    0.775695] WARNING: CPU: 0 PID: 1 at
   ../drivers/gpio/gpiolib.c:1622 _gpiochip_irqchip_add+0x138/0x160
[    0.785034] /soc/gpio at 8012e000: Ignoring 2 default trigger
(...)
[    0.942962] gpio 8012e000.gpio: at address e08f8000
(etc ad nauseam)

Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 205fb399268a..d318ca055489 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1177,7 +1177,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
 				   irqchip,
 				   0,
 				   handle_edge_irq,
-				   IRQ_TYPE_EDGE_FALLING);
+				   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(&dev->dev, "could not add irqchip\n");
 		gpiochip_remove(&nmk_chip->chip);
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2016-09-19  8:50 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-19  8:22 [PATCH] pinctrl: nomadik: don't default-flag IRQs as falling Linus Walleij
2016-09-19  8:50 ` Marc Zyngier

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).