From: alexandre.torgue@st.com (Alexandre TORGUE)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/4] Add STM32 EXTI interrupt controller support
Date: Tue, 20 Sep 2016 18:00:55 +0200 [thread overview]
Message-ID: <1474387259-18926-1-git-send-email-alexandre.torgue@st.com> (raw)
Hi,
This v6 fix useless mask in .free callback of stm32 exti driver (thanks
Thomas).
I resend only patches concerning STM32 EXTI driver (as pinctrl part has
already been applied by Linus W.)
The series adds support to EXTI interrupt controller and GPIO IRQ support in
STM32 pinctrl driver.
The STM32 external interrupt controller consists of edge detectors that
generate interrupts requests or wake-up events.
Each line can be independently configured as interrupt or wake-up source,
and triggers either on rising, fallin or both edges. Each line can also
be masked independently.
Regards
Alex
Changes since v5:
-----------------
- Fix .free callback according to Thomas
Changes since v4:
-----------------
- Fix bad copy/paste in stm32 exti driver
- Remove GPIOLIB_IRQCHIP config in stm32 pinctrl driver
Changes since v3:
-----------------
- Review domain dealloc/free irq in stm32 pinctrl driver
- Review domain dealloc/free irq in stm32 exti driver
- Fix remarks on coding style
Changes since v2:
-----------------
- Define irq_chip for GPIO banks
- Use hierarchical domain for GPIO banks
- Improve search loop inside stm32_exti handler
- Rebased on top of v4.8-rc1
Changes since v1:
-----------------
- Rebased on top of v4.6-rc1
- Change variable name from virq to irq (Linus W.)
Alexandre TORGUE (4):
Documentation: dt-bindings: Document STM32 EXTI controller bindings
drivers: irqchip: Add STM32 external interrupts support
ARM: STM32: Select external interrupts controller
ARM: dts: Add EXTI controller node to stm32f429
.../interrupt-controller/st,stm32-exti.txt | 20 ++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/stm32f429.dtsi | 8 +
drivers/irqchip/Kconfig | 4 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-stm32-exti.c | 201 +++++++++++++++++++++
6 files changed, 235 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
create mode 100644 drivers/irqchip/irq-stm32-exti.c
--
1.9.1
next reply other threads:[~2016-09-20 16:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-20 16:00 Alexandre TORGUE [this message]
2016-09-20 16:00 ` [PATCH v6 1/4] Documentation: dt-bindings: Document STM32 EXTI controller bindings Alexandre TORGUE
2016-09-20 16:00 ` [PATCH v6 2/4] drivers: irqchip: Add STM32 external interrupts support Alexandre TORGUE
2016-09-20 20:16 ` Thomas Gleixner
2016-09-21 7:45 ` Alexandre Torgue
2016-09-21 7:50 ` Thomas Gleixner
2016-09-21 7:54 ` Maxime Coquelin
2016-09-20 16:00 ` [PATCH v6 3/4] ARM: STM32: Select external interrupts controller Alexandre TORGUE
2016-09-20 16:00 ` [PATCH v6 4/4] ARM: dts: Add EXTI controller node to stm32f429 Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474387259-18926-1-git-send-email-alexandre.torgue@st.com \
--to=alexandre.torgue@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox