From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 7/9] clocksource/drivers/arm_arch_timer: Refactor the timer init code to prepare for GTDT
Date: Thu, 29 Sep 2016 02:17:15 +0800 [thread overview]
Message-ID: <1475086637-1914-8-git-send-email-fu.wei@linaro.org> (raw)
In-Reply-To: <1475086637-1914-1-git-send-email-fu.wei@linaro.org>
From: Fu Wei <fu.wei@linaro.org>
The patch refactor original memory-mapped timer init code:
(1) extract some subfunction for reusing some common code
a. get_cnttidr
b. is_best_frame
(2) move base address and irq code for arch_timer_mem to
arch_timer_mem_register
Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 159 +++++++++++++++++++++--------------
1 file changed, 96 insertions(+), 63 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index c7b0040..e78095f 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -57,6 +57,7 @@
static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base;
+static void __iomem *cntctlbase __initdata;
struct arch_timer {
void __iomem *base;
@@ -656,15 +657,49 @@ out:
return err;
}
-static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
+static int __init arch_timer_mem_register(struct device_node *np, void *frame)
{
- int ret;
- irq_handler_t func;
+ struct device_node *frame_node = NULL;
struct arch_timer *t;
+ void __iomem *base;
+ irq_handler_t func;
+ unsigned int irq;
+ int ret;
+
+ if (!frame)
+ return -EINVAL;
+
+ if (np) {
+ frame_node = (struct device_node *)frame;
+ base = of_iomap(frame_node, 0);
+ arch_timer_detect_rate(base, np);
+ if (arch_timer_mem_use_virtual)
+ irq = irq_of_parse_and_map(frame_node, VIRT_SPI);
+ else
+ irq = irq_of_parse_and_map(frame_node, PHYS_SPI);
+ } else {
+ pr_err("Device node is missing.\n");
+ return -EINVAL;
+ }
+
+ if (!base) {
+ pr_err("Can't map frame's registers\n");
+ return -ENXIO;
+ }
+ if (!irq) {
+ pr_err("Frame missing %s irq",
+ arch_timer_mem_use_virtual ? "virt" : "phys");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ arch_counter_base = base;
t = kzalloc(sizeof(*t), GFP_KERNEL);
- if (!t)
- return -ENOMEM;
+ if (!t) {
+ ret = -ENOMEM;
+ goto out;
+ }
t->base = base;
t->evt.irq = irq;
@@ -676,11 +711,13 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
func = arch_timer_handler_phys_mem;
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
- if (ret) {
- pr_err("Failed to request mem timer irq\n");
- kfree(t);
- }
+ if (!ret)
+ return 0;
+ pr_err("Failed to request mem timer irq\n");
+ kfree(t);
+out:
+ iounmap(base);
return ret;
}
@@ -803,21 +840,54 @@ static int __init arch_timer_of_init(struct device_node *np)
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
-static int __init arch_timer_mem_init(struct device_node *np)
+static int __init get_cnttidr(struct device_node *np, u32 *cnttidr)
{
- struct device_node *frame, *best_frame = NULL;
- void __iomem *cntctlbase, *base;
- unsigned int irq, ret = -EINVAL;
- u32 cnttidr;
+ if (!cnttidr)
+ return -EINVAL;
+
+ if (np)
+ cntctlbase = of_iomap(np, 0);
+ else
+ return -EINVAL;
- arch_timers_present |= ARCH_MEM_TIMER;
- cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
pr_err("Can't find CNTCTLBase\n");
return -ENXIO;
}
- cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+ *cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+ return 0;
+}
+
+static bool __init is_best_frame(u32 cnttidr, int n)
+{
+ u32 cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT | CNTACR_RWVT |
+ CNTACR_RVOFF | CNTACR_RVCT;
+
+ /* Try enabling everything, and see what sticks */
+ writel_relaxed(cntacr, cntctlbase + CNTACR(n));
+ cntacr = readl_relaxed(cntctlbase + CNTACR(n));
+
+ if ((cnttidr & CNTTIDR_VIRT(n)) &&
+ !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT)))
+ arch_timer_mem_use_virtual = true;
+ else if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+ return false;
+
+ return true;
+}
+
+static int __init arch_timer_mem_init(struct device_node *np)
+{
+ struct device_node *frame, *best_frame = NULL;
+ unsigned int ret;
+ u32 cnttidr;
+
+ arch_timers_present |= ARCH_MEM_TIMER;
+
+ ret = get_cnttidr(np, &cnttidr);
+ if (ret)
+ return ret;
/*
* Try to find a virtual capable frame. Otherwise fall back to a
@@ -825,60 +895,23 @@ static int __init arch_timer_mem_init(struct device_node *np)
*/
for_each_available_child_of_node(np, frame) {
int n;
- u32 cntacr;
-
if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("Missing frame-number\n");
+ pr_err("Missing frame-number.\n");
of_node_put(frame);
+ ret = -EINVAL;
goto out;
}
-
- /* Try enabling everything, and see what sticks */
- cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
- CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
- writel_relaxed(cntacr, cntctlbase + CNTACR(n));
- cntacr = readl_relaxed(cntctlbase + CNTACR(n));
-
- if ((cnttidr & CNTTIDR_VIRT(n)) &&
- !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
+ if (is_best_frame(cnttidr, n)) {
of_node_put(best_frame);
- best_frame = frame;
- arch_timer_mem_use_virtual = true;
- break;
+ best_frame = of_node_get(frame);
+ if (arch_timer_mem_use_virtual)
+ break;
}
-
- if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
- continue;
-
- of_node_put(best_frame);
- best_frame = of_node_get(frame);
- }
-
- ret= -ENXIO;
- base = arch_counter_base = of_iomap(best_frame, 0);
- if (!base) {
- pr_err("Can't map frame's registers\n");
- goto out;
}
- if (arch_timer_mem_use_virtual)
- irq = irq_of_parse_and_map(best_frame, VIRT_SPI);
- else
- irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
-
- ret = -EINVAL;
- if (!irq) {
- pr_err("Frame missing %s irq",
- arch_timer_mem_use_virtual ? "virt" : "phys");
- goto out;
- }
-
- arch_timer_detect_rate(base, np);
- ret = arch_timer_mem_register(base, irq);
- if (ret)
- goto out;
-
- return arch_timer_common_init();
+ ret = arch_timer_mem_register(np, best_frame);
+ if (!ret)
+ ret = arch_timer_common_init();
out:
iounmap(cntctlbase);
of_node_put(best_frame);
--
2.7.4
next prev parent reply other threads:[~2016-09-28 18:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-28 18:17 [PATCH v14 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2016-09-28 18:17 ` [PATCH v14 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei at linaro.org
2016-10-20 14:45 ` Mark Rutland
2016-10-26 8:31 ` Fu Wei
2016-10-26 10:51 ` Mark Rutland
2016-10-26 10:54 ` Fu Wei
2016-09-28 18:17 ` [PATCH v14 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2016-10-20 15:09 ` Mark Rutland
2016-10-26 8:26 ` Fu Wei
2016-09-28 18:17 ` [PATCH v14 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2016-10-20 15:32 ` Mark Rutland
2016-10-26 8:28 ` Fu Wei
2016-09-28 18:17 ` [PATCH v14 4/9] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2016-10-20 16:37 ` Mark Rutland
2016-10-26 11:10 ` Fu Wei
2016-10-26 12:11 ` Marc Zyngier
2016-10-26 13:41 ` Fu Wei
2016-11-11 13:43 ` Hanjun Guo
2016-11-11 13:46 ` Hanjun Guo
2016-11-11 13:58 ` Hanjun Guo
2016-11-11 15:32 ` Mark Rutland
2016-09-28 18:17 ` [PATCH v14 5/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2016-10-20 16:58 ` Mark Rutland
2016-10-21 11:14 ` Mark Rutland
2016-10-21 11:21 ` Mark Rutland
2016-10-26 8:54 ` Fu Wei
2016-11-11 13:55 ` Hanjun Guo
2016-09-28 18:17 ` [PATCH v14 6/9] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2016-10-21 11:19 ` Mark Rutland
2016-09-28 18:17 ` fu.wei at linaro.org [this message]
2016-10-21 11:32 ` [PATCH v14 7/9] clocksource/drivers/arm_arch_timer: Refactor the timer init code to prepare for GTDT Mark Rutland
2016-10-26 15:24 ` Fu Wei
2016-10-26 15:46 ` Mark Rutland
2016-10-26 16:07 ` Fu Wei
2016-09-28 18:17 ` [PATCH v14 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2016-09-28 18:17 ` [PATCH v14 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2016-09-30 0:40 ` [PATCH v14 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Xiongfeng Wang
2016-10-05 17:26 ` Fu Wei
2016-10-20 14:31 ` Mark Rutland
2016-10-20 14:57 ` Lorenzo Pieralisi
2016-10-20 15:17 ` Mark Rutland
2016-10-26 8:24 ` Fu Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475086637-1914-8-git-send-email-fu.wei@linaro.org \
--to=fu.wei@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).