[RFC 02/10] dt-bindings: interrupt-controller: add DT binding for meson GPIO interrupt controller

[jbrunet@baylibre.com (Jerome Brunet)]

On Sat, 2016-10-08 at 20:29 -0500, Rob Herring wrote:
> On Tue, Oct 04, 2016 at 05:08:20PM +0200, Jerome Brunet wrote:
> > 
> > This commit adds the device tree bindings description for Amlogic's
> > GPIO
> > interrupt controller available on the meson8, meson8b and gxbb SoC
> > families
> > 
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> > ?.../amlogic,meson-gpio-intc.txt????????????????????| 39
> > ++++++++++++++++++++++
> > ?1 file changed, 39 insertions(+)
> > ?create mode 100644 Documentation/devicetree/bindings/interrupt-
> > controller/amlogic,meson-gpio-intc.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/interrupt-
> > controller/amlogic,meson-gpio-intc.txt
> > b/Documentation/devicetree/bindings/interrupt-
> > controller/amlogic,meson-gpio-intc.txt
> > new file mode 100644
> > index 000000000000..bd4cceefcda1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-
> > controller/amlogic,meson-gpio-intc.txt
> > @@ -0,0 +1,39 @@
> > +Amlogic meson GPIO interrupt controller
> > +
> > +Meson SoCs contains an interrupt controller which is able watch
> > the SoC pads
> > +and generate an interrupt on edges or level. The controller is
> > essentially a
> > +256 pads to 8 GIC interrupt multiplexer, with a filter block to
> > select edge
> > +or level and polarity. We don?t expose all 256 mux inputs because
> > the
> > +documentation shows that upper part is not mapped to any pad. The
> > actual number
> > +of interrupt exposed depends on the SoC.
> > +
> > +Required properties:
> > +
> > +- compatible : should be: "amlogic,meson8-gpio-intc? or
> > +???amlogic,meson8b-gpio-intc? or ?amlogic,gxbb-gpio-intc?
> 
> One per line please if you respin the series.

Got it. There will be a respin for sure.
Thx Rob

> 
> Acked-by: Rob Herring <robh@kernel.org>