* [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure
@ 2016-10-12 2:14 Jun Nie
2016-10-12 2:14 ` [PATCH 2/2] arm64: dts: zx: Add clock controller nodes Jun Nie
2016-10-12 2:37 ` [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Shawn Guo
0 siblings, 2 replies; 4+ messages in thread
From: Jun Nie @ 2016-10-12 2:14 UTC (permalink / raw)
To: linux-arm-kernel
GICR for multiple CPU can be described with start address and stride,
or with multiple address. Current multiple address and stride are
both used. Fix it.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
arch/arm64/boot/dts/zte/zx296718.dtsi | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index a223066..6b239a3 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -239,16 +239,11 @@
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <0>;
- #redistributor-regions = <6>;
- redistributor-stride = <0x0 0x40000>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x20000>;
interrupt-controller;
reg = <0x02a00000 0x10000>,
- <0x02b00000 0x20000>,
- <0x02b20000 0x20000>,
- <0x02b40000 0x20000>,
- <0x02b60000 0x20000>,
- <0x02b80000 0x20000>,
- <0x02ba0000 0x20000>;
+ <0x02b00000 0xc0000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: zx: Add clock controller nodes
2016-10-12 2:14 [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Jun Nie
@ 2016-10-12 2:14 ` Jun Nie
2016-10-12 2:39 ` Shawn Guo
2016-10-12 2:37 ` [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Shawn Guo
1 sibling, 1 reply; 4+ messages in thread
From: Jun Nie @ 2016-10-12 2:14 UTC (permalink / raw)
To: linux-arm-kernel
Add clock controller nodes, including one top controller
two low speed controllers and one audio controller.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
arch/arm64/boot/dts/zte/zx296718.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index 6b239a3..33e42d5 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -279,9 +279,33 @@
dma-requests = <32>;
};
+ lsp0crm: clock-controller at 01420000 {
+ compatible = "zte,zx296718-lsp0crm";
+ reg = <0x01420000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ lsp1crm: clock-controller at 01430000 {
+ compatible = "zte,zx296718-lsp1crm";
+ reg = <0x01430000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ topcrm: clock-controller at 01461000 {
+ compatible = "zte,zx296718-topcrm";
+ reg = <0x01461000 0x1000>;
+ #clock-cells = <1>;
+ };
+
sysctrl: sysctrl at 1463000 {
compatible = "zte,zx296718-sysctrl", "syscon";
reg = <0x1463000 0x1000>;
};
+
+ audiocrm: clock-controller at 01480000 {
+ compatible = "zte,zx296718-audiocrm";
+ reg = <0x01480000 0x1000>;
+ #clock-cells = <1>;
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure
2016-10-12 2:14 [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Jun Nie
2016-10-12 2:14 ` [PATCH 2/2] arm64: dts: zx: Add clock controller nodes Jun Nie
@ 2016-10-12 2:37 ` Shawn Guo
1 sibling, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2016-10-12 2:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 12, 2016 at 10:14:15AM +0800, Jun Nie wrote:
> GICR for multiple CPU can be described with start address and stride,
> or with multiple address. Current multiple address and stride are
> both used. Fix it.
I think we need to tell the full story about this boot failure in commit
log, i.e. it boots fine on v4.8-rc and fails on linux-next because of
the mm/vmalloc.c changes.
Shawn
>
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 11 +++--------
> 1 file changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index a223066..6b239a3 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -239,16 +239,11 @@
> compatible = "arm,gic-v3";
> #interrupt-cells = <3>;
> #address-cells = <0>;
> - #redistributor-regions = <6>;
> - redistributor-stride = <0x0 0x40000>;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x20000>;
> interrupt-controller;
> reg = <0x02a00000 0x10000>,
> - <0x02b00000 0x20000>,
> - <0x02b20000 0x20000>,
> - <0x02b40000 0x20000>,
> - <0x02b60000 0x20000>,
> - <0x02b80000 0x20000>,
> - <0x02ba0000 0x20000>;
> + <0x02b00000 0xc0000>;
> interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: zx: Add clock controller nodes
2016-10-12 2:14 ` [PATCH 2/2] arm64: dts: zx: Add clock controller nodes Jun Nie
@ 2016-10-12 2:39 ` Shawn Guo
0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2016-10-12 2:39 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 12, 2016 at 10:14:16AM +0800, Jun Nie wrote:
> Add clock controller nodes, including one top controller
> two low speed controllers and one audio controller.
>
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index 6b239a3..33e42d5 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -279,9 +279,33 @@
> dma-requests = <32>;
> };
>
> + lsp0crm: clock-controller at 01420000 {
Please drop the leading zeros from unit-address in node name.
Shawn
> + compatible = "zte,zx296718-lsp0crm";
> + reg = <0x01420000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + lsp1crm: clock-controller at 01430000 {
> + compatible = "zte,zx296718-lsp1crm";
> + reg = <0x01430000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + topcrm: clock-controller at 01461000 {
> + compatible = "zte,zx296718-topcrm";
> + reg = <0x01461000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> sysctrl: sysctrl at 1463000 {
> compatible = "zte,zx296718-sysctrl", "syscon";
> reg = <0x1463000 0x1000>;
> };
> +
> + audiocrm: clock-controller at 01480000 {
> + compatible = "zte,zx296718-audiocrm";
> + reg = <0x01480000 0x1000>;
> + #clock-cells = <1>;
> + };
> };
> };
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-12 2:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-12 2:14 [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Jun Nie
2016-10-12 2:14 ` [PATCH 2/2] arm64: dts: zx: Add clock controller nodes Jun Nie
2016-10-12 2:39 ` Shawn Guo
2016-10-12 2:37 ` [PATCH 1/2] arm64: dts: zx: Change gic node to fix boot failure Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).