From: hs.liao@mediatek.com (HS Liao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v15 4/4] CMDQ: save energy
Date: Mon, 17 Oct 2016 18:11:57 +0800 [thread overview]
Message-ID: <1476699117-3001-5-git-send-email-hs.liao@mediatek.com> (raw)
In-Reply-To: <1476699117-3001-1-git-send-email-hs.liao@mediatek.com>
1. take suspend/resume into consideration
2. use clk_disable_unprepare instead of clk_disable to save more energy
when CMDQ is idle.
Signed-off-by: HS Liao <hs.liao@mediatek.com>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 94 +++++++++++++++++++++++++++++++++++---
1 file changed, 88 insertions(+), 6 deletions(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index d086fd8..f235249 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -22,6 +22,7 @@
#include <linux/mailbox_controller.h>
#include <linux/mailbox/mtk-cmdq-mailbox.h>
#include <linux/timer.h>
+#include <linux/workqueue.h>
#define CMDQ_THR_MAX_COUNT 3 /* main, sub, general(misc) */
#define CMDQ_OP_CODE_MASK (0xff << CMDQ_OP_CODE_SHIFT)
@@ -75,12 +76,19 @@ struct cmdq_task {
struct cmdq_pkt *pkt; /* the packet sent from mailbox client */
};
+struct cmdq_clk_release {
+ struct cmdq *cmdq;
+ struct work_struct release_work;
+};
+
struct cmdq {
struct mbox_controller mbox;
void __iomem *base;
u32 irq;
+ struct workqueue_struct *clk_release_wq;
struct cmdq_thread thread[CMDQ_THR_MAX_COUNT];
struct clk *clock;
+ bool suspended;
};
static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
@@ -202,10 +210,13 @@ static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
{
struct cmdq *cmdq;
struct cmdq_task *task;
- unsigned long curr_pa, end_pa;
+ unsigned long curr_pa, end_pa, flags;
cmdq = dev_get_drvdata(thread->chan->mbox->dev);
+ /* Client should not flush new tasks if suspended. */
+ WARN_ON(cmdq->suspended);
+
task = kzalloc(sizeof(*task), GFP_ATOMIC);
task->cmdq = cmdq;
INIT_LIST_HEAD(&task->list_entry);
@@ -215,7 +226,14 @@ static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
task->pkt = pkt;
if (list_empty(&thread->task_busy_list)) {
- WARN_ON(clk_enable(cmdq->clock) < 0);
+ /*
+ * Unlock for clk prepare (sleeping function).
+ * This is safe since clk_prepare_enable has internal locks.
+ */
+ spin_unlock_irqrestore(&thread->chan->lock, flags);
+ WARN_ON(clk_prepare_enable(cmdq->clock) < 0);
+ spin_lock_irqsave(&thread->chan->lock, flags);
+
WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
@@ -297,6 +315,26 @@ static void cmdq_task_handle_error(struct cmdq_task *task)
cmdq_thread_resume(thread);
}
+static void cmdq_clk_release_work(struct work_struct *work_item)
+{
+ struct cmdq_clk_release *clk_release = container_of(work_item,
+ struct cmdq_clk_release, release_work);
+ struct cmdq *cmdq = clk_release->cmdq;
+
+ clk_disable_unprepare(cmdq->clock);
+ kfree(clk_release);
+}
+
+static void cmdq_clk_release_schedule(struct cmdq *cmdq)
+{
+ struct cmdq_clk_release *clk_release;
+
+ clk_release = kmalloc(sizeof(*clk_release), GFP_ATOMIC);
+ clk_release->cmdq = cmdq;
+ INIT_WORK(&clk_release->release_work, cmdq_clk_release_work);
+ queue_work(cmdq->clk_release_wq, &clk_release->release_work);
+}
+
static void cmdq_thread_irq_handler(struct cmdq *cmdq,
struct cmdq_thread *thread)
{
@@ -346,7 +384,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
if (list_empty(&thread->task_busy_list)) {
cmdq_thread_disable(cmdq, thread);
- clk_disable(cmdq->clock);
+ cmdq_clk_release_schedule(cmdq);
} else {
mod_timer(&thread->timeout,
jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
@@ -405,16 +443,50 @@ static void cmdq_thread_handle_timeout(unsigned long data)
cmdq_thread_resume(thread);
cmdq_thread_disable(cmdq, thread);
- clk_disable(cmdq->clock);
+ cmdq_clk_release_schedule(cmdq);
spin_unlock_irqrestore(&thread->chan->lock, flags);
}
+static int cmdq_suspend(struct device *dev)
+{
+ struct cmdq *cmdq = dev_get_drvdata(dev);
+ struct cmdq_thread *thread;
+ int i;
+ bool task_running = false;
+
+ cmdq->suspended = true;
+
+ for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
+ thread = &cmdq->thread[i];
+ if (!list_empty(&thread->task_busy_list)) {
+ mod_timer(&thread->timeout, jiffies + 1);
+ task_running = true;
+ }
+ }
+
+ if (task_running) {
+ dev_warn(dev, "exist running task(s) in suspend\n");
+ schedule();
+ }
+
+ flush_workqueue(cmdq->clk_release_wq);
+ return 0;
+}
+
+static int cmdq_resume(struct device *dev)
+{
+ struct cmdq *cmdq = dev_get_drvdata(dev);
+
+ cmdq->suspended = false;
+ return 0;
+}
+
static int cmdq_remove(struct platform_device *pdev)
{
struct cmdq *cmdq = platform_get_drvdata(pdev);
+ destroy_workqueue(cmdq->clk_release_wq);
mbox_controller_unregister(&cmdq->mbox);
- clk_unprepare(cmdq->clock);
return 0;
}
@@ -530,11 +602,20 @@ static int cmdq_probe(struct platform_device *pdev)
return err;
}
+ cmdq->clk_release_wq = alloc_ordered_workqueue(
+ "%s", WQ_MEM_RECLAIM | WQ_HIGHPRI,
+ "cmdq_clk_release");
+
platform_set_drvdata(pdev, cmdq);
- WARN_ON(clk_prepare(cmdq->clock) < 0);
+
return 0;
}
+static const struct dev_pm_ops cmdq_pm_ops = {
+ .suspend = cmdq_suspend,
+ .resume = cmdq_resume,
+};
+
static const struct of_device_id cmdq_of_ids[] = {
{.compatible = "mediatek,mt8173-gce",},
{}
@@ -545,6 +626,7 @@ static int cmdq_probe(struct platform_device *pdev)
.remove = cmdq_remove,
.driver = {
.name = "mtk_cmdq",
+ .pm = &cmdq_pm_ops,
.of_match_table = cmdq_of_ids,
}
};
--
1.9.1
prev parent reply other threads:[~2016-10-17 10:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 10:11 [PATCH v15 0/4] Mediatek MT8173 CMDQ support HS Liao
2016-10-17 10:11 ` [PATCH v15 1/4] dt-bindings: soc: Add documentation for the MediaTek GCE unit HS Liao
2016-10-17 10:11 ` [PATCH v15 2/4] CMDQ: Mediatek CMDQ driver HS Liao
2016-10-17 10:11 ` [PATCH v15 3/4] arm64: dts: mt8173: Add GCE node HS Liao
2016-10-17 10:11 ` HS Liao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476699117-3001-5-git-send-email-hs.liao@mediatek.com \
--to=hs.liao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox