From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly
Date: Mon, 24 Oct 2016 00:31:31 -0400 [thread overview]
Message-ID: <1477283492-26657-3-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1477283492-26657-1-git-send-email-okaya@codeaurora.org>
Ondrej reported that IRQs stopped working in v4.7 on several
platforms. A typical scenario, from Ondrej's VT82C694X/694X, is:
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI
We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.
We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.
Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().
Link: http://lkml.kernel.org/r/201609251512.05657.linux at rainbow-software.org
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
arch/x86/kernel/acpi/boot.c | 1 +
drivers/acpi/pci_link.c | 30 +++++++++++++++---------------
include/linux/acpi.h | 1 +
3 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 90d84c3..0ffd26e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -453,6 +453,7 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+ acpi_penalize_sci_irq(bus_irq, trigger, polarity);
/*
* stash over-ride to indicate we've been here
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6229b02..74bf96e 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -87,6 +87,7 @@ struct acpi_pci_link {
static LIST_HEAD(acpi_link_list);
static DEFINE_MUTEX(acpi_link_lock);
+static int sci_irq = -1, sci_penalty;
/* --------------------------------------------------------------------------
PCI Link Device Management
@@ -496,25 +497,13 @@ static int acpi_irq_get_penalty(int irq)
{
int penalty = 0;
- /*
- * Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict
- * with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be
- * use for PCI IRQs.
- */
- if (irq == acpi_gbl_FADT.sci_interrupt) {
- u32 type = irq_get_trigger_type(irq) & IRQ_TYPE_SENSE_MASK;
-
- if (type != IRQ_TYPE_LEVEL_LOW)
- penalty += PIRQ_PENALTY_ISA_ALWAYS;
- else
- penalty += PIRQ_PENALTY_PCI_USING;
- }
+ if (irq == sci_irq)
+ penalty += sci_penalty;
if (irq < ACPI_MAX_ISA_IRQS)
return penalty + acpi_isa_irq_penalty[irq];
- penalty += acpi_irq_pci_sharing_penalty(irq);
- return penalty;
+ return penalty + acpi_irq_pci_sharing_penalty(irq);
}
int __init acpi_irq_penalty_init(void)
@@ -881,6 +870,17 @@ bool acpi_isa_irq_available(int irq)
acpi_irq_get_penalty(irq) < PIRQ_PENALTY_ISA_ALWAYS);
}
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
+{
+ sci_irq = irq;
+
+ if (trigger == ACPI_MADT_TRIGGER_LEVEL &&
+ polarity == ACPI_MADT_POLARITY_ACTIVE_LOW)
+ sci_penalty = PIRQ_PENALTY_PCI_USING;
+ else
+ sci_penalty = PIRQ_PENALTY_ISA_ALWAYS;
+}
+
/*
* Over-ride default table to reserve additional IRQs for use by ISA
* e.g. acpi_irq_isa=5
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c5eaf2f..67d1d3e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -318,6 +318,7 @@ struct pci_dev;
int acpi_pci_irq_enable (struct pci_dev *dev);
void acpi_penalize_isa_irq(int irq, int active);
bool acpi_isa_irq_available(int irq);
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
void acpi_pci_irq_disable (struct pci_dev *dev);
extern int ec_read(u8 addr, u8 *val);
--
1.9.1
next prev parent reply other threads:[~2016-10-24 4:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-24 4:31 [PATCH V5 0/3] ACPI, PCI, IRQ: revert penalty calculation for ISA and SCI interrupts Sinan Kaya
2016-10-24 4:31 ` [PATCH V5 1/3] ACPI, PCI, IRQ: assign ISA IRQ directly during early boot stages Sinan Kaya
2016-10-24 4:46 ` Jonathan Liu
2016-10-24 4:31 ` Sinan Kaya [this message]
2016-10-24 4:46 ` [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly Jonathan Liu
2016-10-24 4:31 ` [PATCH V5 3/3] ACPI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs Sinan Kaya
2016-10-24 4:46 ` Jonathan Liu
2016-10-26 18:34 ` Sinan Kaya
2016-10-27 10:31 ` [PATCH V5 0/3] ACPI,PCI,IRQ: revert penalty calculation for ISA and SCI interrupts Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477283492-26657-3-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).