linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] mmc: mmci: clean up header defines
Date: Mon, 24 Oct 2016 16:21:24 +0200	[thread overview]
Message-ID: <1477318886-24851-1-git-send-email-linus.walleij@linaro.org> (raw)

There was some confusion in the CPSM (Command Path State Machine)
and DPSM (Data Path State Machine) regarding the naming of the
registers, clarify the meaning of this acronym so the naming is
understandable, and consistently use BIT() to define these fields.

Include new definitions for a few bits found in a patch from
Srinivas Kandagatla.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/host/mmci.c |  2 +-
 drivers/mmc/host/mmci.h | 69 +++++++++++++++++++++++++++----------------------
 2 files changed, 39 insertions(+), 32 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index df990bb8c873..79b135752d3d 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -210,7 +210,7 @@ static struct variant_data variant_qcom = {
 				  MCI_QCOM_CLK_SELECT_IN_FBCLK,
 	.clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8,
 	.datactrl_mask_ddrmode	= MCI_QCOM_CLK_SELECT_IN_DDR_MODE,
-	.data_cmd_enable	= MCI_QCOM_CSPM_DATCMD,
+	.data_cmd_enable	= MCI_CPSM_QCOM_DATCMD,
 	.blksz_datactrl4	= true,
 	.datalength_bits	= 24,
 	.pwrreg_powerup		= MCI_PWR_UP,
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index a1f5e4f49e2a..8952285196cd 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -51,25 +51,27 @@
 #define MCI_QCOM_CLK_SELECT_IN_DDR_MODE	(BIT(14) | BIT(15))
 
 #define MMCIARGUMENT		0x008
-#define MMCICOMMAND		0x00c
-#define MCI_CPSM_RESPONSE	(1 << 6)
-#define MCI_CPSM_LONGRSP	(1 << 7)
-#define MCI_CPSM_INTERRUPT	(1 << 8)
-#define MCI_CPSM_PENDING	(1 << 9)
-#define MCI_CPSM_ENABLE		(1 << 10)
-/* Argument flag extenstions in the ST Micro versions */
-#define MCI_ST_SDIO_SUSP	(1 << 11)
-#define MCI_ST_ENCMD_COMPL	(1 << 12)
-#define MCI_ST_NIEN		(1 << 13)
-#define MCI_ST_CE_ATACMD	(1 << 14)
 
-/* Modified on Qualcomm Integrations */
-#define MCI_QCOM_CSPM_DATCMD		BIT(12)
-#define MCI_QCOM_CSPM_MCIABORT		BIT(13)
-#define MCI_QCOM_CSPM_CCSENABLE		BIT(14)
-#define MCI_QCOM_CSPM_CCSDISABLE	BIT(15)
-#define MCI_QCOM_CSPM_AUTO_CMD19	BIT(16)
-#define MCI_QCOM_CSPM_AUTO_CMD21	BIT(21)
+/* The command register controls the Command Path State Machine (CPSM) */
+#define MMCICOMMAND		0x00c
+#define MCI_CPSM_RESPONSE	BIT(6)
+#define MCI_CPSM_LONGRSP	BIT(7)
+#define MCI_CPSM_INTERRUPT	BIT(8)
+#define MCI_CPSM_PENDING	BIT(9)
+#define MCI_CPSM_ENABLE		BIT(10)
+/* Command register flag extenstions in the ST Micro versions */
+#define MCI_CPSM_ST_SDIO_SUSP		BIT(11)
+#define MCI_CPSM_ST_ENCMD_COMPL		BIT(12)
+#define MCI_CPSM_ST_NIEN		BIT(13)
+#define MCI_CPSM_ST_CE_ATACMD		BIT(14)
+/* Command register flag extensions in the Qualcomm versions */
+#define MCI_CPSM_QCOM_PROGENA		BIT(11)
+#define MCI_CPSM_QCOM_DATCMD		BIT(12)
+#define MCI_CPSM_QCOM_MCIABORT		BIT(13)
+#define MCI_CPSM_QCOM_CCSENABLE		BIT(14)
+#define MCI_CPSM_QCOM_CCSDISABLE	BIT(15)
+#define MCI_CPSM_QCOM_AUTO_CMD19	BIT(16)
+#define MCI_CPSM_QCOM_AUTO_CMD21	BIT(21)
 
 #define MMCIRESPCMD		0x010
 #define MMCIRESPONSE0		0x014
@@ -78,22 +80,27 @@
 #define MMCIRESPONSE3		0x020
 #define MMCIDATATIMER		0x024
 #define MMCIDATALENGTH		0x028
+
+/* The data control register controls the Data Path State Machine (DPSM) */
 #define MMCIDATACTRL		0x02c
-#define MCI_DPSM_ENABLE		(1 << 0)
-#define MCI_DPSM_DIRECTION	(1 << 1)
-#define MCI_DPSM_MODE		(1 << 2)
-#define MCI_DPSM_DMAENABLE	(1 << 3)
-#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+#define MCI_DPSM_ENABLE		BIT(0)
+#define MCI_DPSM_DIRECTION	BIT(1)
+#define MCI_DPSM_MODE		BIT(2)
+#define MCI_DPSM_DMAENABLE	BIT(3)
+#define MCI_DPSM_BLOCKSIZE	BIT(4)
 /* Control register extensions in the ST Micro U300 and Ux500 versions */
-#define MCI_ST_DPSM_RWSTART	(1 << 8)
-#define MCI_ST_DPSM_RWSTOP	(1 << 9)
-#define MCI_ST_DPSM_RWMOD	(1 << 10)
-#define MCI_ST_DPSM_SDIOEN	(1 << 11)
+#define MCI_ST_DPSM_RWSTART	BIT(8)
+#define MCI_ST_DPSM_RWSTOP	BIT(9)
+#define MCI_ST_DPSM_RWMOD	BIT(10)
+#define MCI_ST_DPSM_SDIOEN	BIT(11)
 /* Control register extensions in the ST Micro Ux500 versions */
-#define MCI_ST_DPSM_DMAREQCTL	(1 << 12)
-#define MCI_ST_DPSM_DBOOTMODEEN	(1 << 13)
-#define MCI_ST_DPSM_BUSYMODE	(1 << 14)
-#define MCI_ST_DPSM_DDRMODE	(1 << 15)
+#define MCI_ST_DPSM_DMAREQCTL	BIT(12)
+#define MCI_ST_DPSM_DBOOTMODEEN	BIT(13)
+#define MCI_ST_DPSM_BUSYMODE	BIT(14)
+#define MCI_ST_DPSM_DDRMODE	BIT(15)
+/* Control register extensions in the Qualcomm versions */
+#define MCI_QCOM_DPSM_DATA_PEND	BIT(17)
+#define MCI_QCOM_DPSM_RX_DATA_PEND BIT(20)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034
-- 
2.7.4

             reply	other threads:[~2016-10-24 14:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-24 14:21 Linus Walleij [this message]
2016-10-24 14:21 ` [PATCH 2/3] mmc: mmci: refactor ST Micro busy detection Linus Walleij
2016-10-24 14:21 ` [PATCH 3/3] RFC: mmc: mmci: add qcom specific program end support Linus Walleij
2016-10-24 15:33 ` [PATCH 1/3] mmc: mmci: clean up header defines Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477318886-24851-1-git-send-email-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).