From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] irqchip/gic-v3: Convert arm64 GIC accessors to {read, write}_sysreg_s
Date: Fri, 28 Oct 2016 12:23:57 +0100 [thread overview]
Message-ID: <1477653838-21569-1-git-send-email-will.deacon@arm.com> (raw)
The GIC system registers are accessed using open-coded wrappers around
the mrs_s/msr_s asm macros.
This patch moves the code over to the {read,wrote}_sysreg_s accessors
instead, reducing the amount of explicit asm blocks in the arch headers.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm64/include/asm/arch_gicv3.h | 45 ++++++++++++++-----------------------
1 file changed, 17 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index f8ae6d6e4767..fdf34f8b4ee0 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -80,18 +80,8 @@
#include <linux/stringify.h>
#include <asm/barrier.h>
-#define read_gicreg(r) \
- ({ \
- u64 reg; \
- asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg)); \
- reg; \
- })
-
-#define write_gicreg(v,r) \
- do { \
- u64 __val = (v); \
- asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\
- } while (0)
+#define read_gicreg read_sysreg_s
+#define write_gicreg write_sysreg_s
/*
* Low-level accessors
@@ -102,13 +92,13 @@
static inline void gic_write_eoir(u32 irq)
{
- asm volatile("msr_s " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" ((u64)irq));
+ write_sysreg_s(irq, ICC_EOIR1_EL1);
isb();
}
static inline void gic_write_dir(u32 irq)
{
- asm volatile("msr_s " __stringify(ICC_DIR_EL1) ", %0" : : "r" ((u64)irq));
+ write_sysreg_s(irq, ICC_DIR_EL1);
isb();
}
@@ -116,7 +106,7 @@ static inline u64 gic_read_iar_common(void)
{
u64 irqstat;
- asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
+ irqstat = read_sysreg_s(ICC_IAR1_EL1);
dsb(sy);
return irqstat;
}
@@ -134,10 +124,12 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
asm volatile(
"nop;nop;nop;nop\n\t"
- "nop;nop;nop;nop\n\t"
- "mrs_s %0, " __stringify(ICC_IAR1_EL1) "\n\t"
- "nop;nop;nop;nop"
- : "=r" (irqstat));
+ "nop;nop;nop;nop");
+
+ irqstat = read_sysreg_s(ICC_IAR1_EL1);
+
+ asm volatile(
+ "nop;nop;nop;nop");
mb();
return irqstat;
@@ -145,37 +137,34 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
static inline void gic_write_pmr(u32 val)
{
- asm volatile("msr_s " __stringify(ICC_PMR_EL1) ", %0" : : "r" ((u64)val));
+ write_sysreg_s(val, ICC_PMR_EL1);
}
static inline void gic_write_ctlr(u32 val)
{
- asm volatile("msr_s " __stringify(ICC_CTLR_EL1) ", %0" : : "r" ((u64)val));
+ write_sysreg_s(val, ICC_CTLR_EL1);
isb();
}
static inline void gic_write_grpen1(u32 val)
{
- asm volatile("msr_s " __stringify(ICC_GRPEN1_EL1) ", %0" : : "r" ((u64)val));
+ write_sysreg_s(val, ICC_GRPEN1_EL1);
isb();
}
static inline void gic_write_sgi1r(u64 val)
{
- asm volatile("msr_s " __stringify(ICC_SGI1R_EL1) ", %0" : : "r" (val));
+ write_sysreg_s(val, ICC_SGI1R_EL1);
}
static inline u32 gic_read_sre(void)
{
- u64 val;
-
- asm volatile("mrs_s %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
- return val;
+ return read_sysreg_s(ICC_SRE_EL1);
}
static inline void gic_write_sre(u32 val)
{
- asm volatile("msr_s " __stringify(ICC_SRE_EL1) ", %0" : : "r" ((u64)val));
+ write_sysreg_s(val, ICC_SRE_EL1);
isb();
}
--
2.1.4
next reply other threads:[~2016-10-28 11:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-28 11:23 Will Deacon [this message]
2016-10-28 11:23 ` [PATCH 2/2] irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154 Will Deacon
2016-10-28 15:10 ` Mark Rutland
2016-10-28 15:16 ` Marc Zyngier
2016-10-28 14:54 ` [PATCH 1/2] irqchip/gic-v3: Convert arm64 GIC accessors to {read, write}_sysreg_s Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477653838-21569-1-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).