From mboxrd@z Thu Jan 1 00:00:00 1970 From: sudeep.holla@arm.com (Sudeep Holla) Date: Mon, 14 Nov 2016 15:44:08 +0000 Subject: [PATCH] ARM: dts: at91: replace gpio-key, wakeup with wakeup-source for sam9260ek Message-ID: <1479138250-17780-2-git-send-email-sudeep.holla@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Jean-Christophe Plagniol-Villard Signed-off-by: Sudeep Holla --- arch/arm/boot/dts/at91sam9260ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Hi, Inspite of getting rid of most of the legacy property almost a year ago, addition of new platforms have brought this back and over time it's now found again in few places. Just get rid of them *again* Regards, Sudeep diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 2c87f58448e7..b2578feceb08 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -174,14 +174,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; -- 2.7.4