[PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers

[PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers

[Bartosz Golaszewski]

This is a follow-up for my previous series:

  ARM: da850: new drivers for better LCDC support

from which the new drivers were merged, while the patch adding the
panel node was nacked and has been dropped.

The first patch in this series enables the new drivers in da850.dtsi.
It has been changed since the last iteration to not disable the added
nodes. Also: the patch enabling the nodes in da850-lcdk.dts has been
dropped too.

The second patch updates the davinci defconfig.

Bartosz Golaszewski (2):
  ARM: dts: da850: add the mstpri and ddrctl nodes
  ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers

 arch/arm/boot/dts/da850.dtsi           | 9 +++++++++
 arch/arm/configs/davinci_all_defconfig | 2 ++
 2 files changed, 11 insertions(+)

-- 
2.9.3

[PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes

[Bartosz Golaszewski]

Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
controller drivers to da850.dtsi.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 1bb1f6d..1635218 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -440,6 +440,11 @@
 			interrupts = <52>;
 			status = "disabled";
 		};
+
+		mstpri: mstpri at 14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+		};
 	};
 	aemif: aemif at 68000000 {
 		compatible = "ti,da850-aemif";
@@ -451,4 +456,8 @@
 			  1 0 0x68000000 0x00008000>;
 		status = "disabled";
 	};
+	ddrctl: ddrctl at b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
+	};
 };
-- 
2.9.3

[PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes

[Sekhar Nori]

On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote:
> Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
> controller drivers to da850.dtsi.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 1bb1f6d..1635218 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -440,6 +440,11 @@
>  			interrupts = <52>;
>  			status = "disabled";
>  		};
> +
> +		mstpri: mstpri at 14110 {
> +			compatible = "ti,da850-mstpri";
> +			reg = <0x14110 0x0c>;
> +		};

Instead of adding the node to the end, can you place it above the
cfgchip node to keep it sorted by reg. We have not really followed that
in this file. May be we should have. But lets start with this.

>  	};
>  	aemif: aemif at 68000000 {
>  		compatible = "ti,da850-aemif";
> @@ -451,4 +456,8 @@
>  			  1 0 0x68000000 0x00008000>;
>  		status = "disabled";
>  	};
> +	ddrctl: ddrctl at b0000000 {
> +		compatible = "ti,da850-ddr-controller";
> +		reg = <0xb0000000 0xe8>;
> +	};

Can you name the node memory-controller at b0000000? Thats the generic name
suggested by ePAPR 1.1 for memory controllers.

I could not find any naming suggestions for the bus master priority
controller above, but based on the pattern used for other controllers,
may be it should be called priority-controller at 14110 instead of mstpri at 14110

Thanks,
Sekhar

[PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers

[Bartosz Golaszewski]

With the da8xx memory controller and master peripheral priority
drivers merged and corresponding device tree changes in place we can
now enable appropriate options by default.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/configs/davinci_all_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index b5e978f..f814f01 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -56,6 +56,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DA8XX_MSTPRI=y
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
@@ -187,6 +188,7 @@ CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=m
+CONFIG_DA8XX_DDRCTL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
-- 
2.9.3

[PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers

[Sekhar Nori]

On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote:
> With the da8xx memory controller and master peripheral priority
> drivers merged and corresponding device tree changes in place we can
> now enable appropriate options by default.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Applied to v4.10/defconfig

Thanks,
Sekhar