Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: abailon@baylibre.com (Alexandre Bailon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/2] ARM: dts: da850: Add the usb otg device node
Date: Wed, 16 Nov 2016 12:07:35 +0100	[thread overview]
Message-ID: <1479294456-7942-2-git-send-email-abailon@baylibre.com> (raw)
In-Reply-To: <1479294456-7942-1-git-send-email-abailon@baylibre.com>

This adds the device tree node for the usb otg
controller present in the da850 family of SoC's.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2534aab..ddf4c6e 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -383,6 +383,16 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
+		usb0: usb at 200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x10000>;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
 		mdio: mdio at 224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
-- 
2.7.3

  reply	other threads:[~2016-11-16 11:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-16 11:07 [PATCH v5 0/2] platform: Add DT support for DA8xx Alexandre Bailon
2016-11-16 11:07 ` Alexandre Bailon [this message]
2016-11-16 11:07 ` [PATCH v5 2/2] ARM: dts: da850-lcdk: Enable the usb otg device node Alexandre Bailon
2016-11-20 13:08 ` [PATCH v5 0/2] platform: Add DT support for DA8xx Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479294456-7942-2-git-send-email-abailon@baylibre.com \
    --to=abailon@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox