From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v16 04/15] clocksource/drivers/arm_arch_timer: rename some enums and defines, and some cleanups.
Date: Wed, 16 Nov 2016 21:48:57 +0800 [thread overview]
Message-ID: <1479304148-2965-5-git-send-email-fu.wei@linaro.org> (raw)
In-Reply-To: <1479304148-2965-1-git-send-email-fu.wei@linaro.org>
From: Fu Wei <fu.wei@linaro.org>
Rename some enums and defines, to unify the format of enums and defines
in arm_arch_timer.h, also update all the users of these enums and defines:
drivers/clocksource/arm_arch_timer.c
virt/kvm/arm/hyp/timer-sr.c
And do some cleanups, according to the suggestion from checkpatch.pl:
(1) using BIT(nr) instead of (1 << nr)
(2) using 'unsigned int' instead of 'unsigned'
No functional change.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 111 ++++++++++++++++++-----------------
include/clocksource/arm_arch_timer.h | 40 ++++++-------
virt/kvm/arm/hyp/timer-sr.c | 6 +-
3 files changed, 81 insertions(+), 76 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 15341cf..dd1040d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -66,11 +66,11 @@ struct arch_timer {
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate;
-static int arch_timer_ppi[MAX_TIMER_PPI];
+static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
-static enum arch_timer_ppi_nr arch_timer_uses_ppi = VIRT_PPI;
+static enum arch_timer_ppi_nr arch_timer_uses_ppi = ARCH_TIMER_VIRT_PPI;
static bool arch_timer_c3stop;
static bool arch_timer_mem_use_virtual;
@@ -340,7 +340,7 @@ static void fsl_a008585_set_sne(struct clock_event_device *clk)
if (!static_branch_unlikely(&arch_timer_read_ool_enabled))
return;
- if (arch_timer_uses_ppi == VIRT_PPI)
+ if (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
clk->set_next_event = fsl_a008585_set_next_event_virt;
else
clk->set_next_event = fsl_a008585_set_next_event_phys;
@@ -352,7 +352,7 @@ static void __arch_timer_setup(unsigned type,
{
clk->features = CLOCK_EVT_FEAT_ONESHOT;
- if (type == ARCH_CP15_TIMER) {
+ if (type == ARCH_TIMER_TYPE_CP15) {
if (arch_timer_c3stop)
clk->features |= CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
@@ -360,14 +360,14 @@ static void __arch_timer_setup(unsigned type,
clk->cpumask = cpumask_of(smp_processor_id());
clk->irq = arch_timer_ppi[arch_timer_uses_ppi];
switch (arch_timer_uses_ppi) {
- case VIRT_PPI:
+ case ARCH_TIMER_VIRT_PPI:
clk->set_state_shutdown = arch_timer_shutdown_virt;
clk->set_state_oneshot_stopped = arch_timer_shutdown_virt;
clk->set_next_event = arch_timer_set_next_event_virt;
break;
- case PHYS_SECURE_PPI:
- case PHYS_NONSECURE_PPI:
- case HYP_PPI:
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ case ARCH_TIMER_HYP_PPI:
clk->set_state_shutdown = arch_timer_shutdown_phys;
clk->set_state_oneshot_stopped = arch_timer_shutdown_phys;
clk->set_next_event = arch_timer_set_next_event_phys;
@@ -447,8 +447,8 @@ static void arch_counter_set_user_access(void)
static bool arch_timer_has_nonsecure_ppi(void)
{
- return (arch_timer_uses_ppi == PHYS_SECURE_PPI &&
- arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ return (arch_timer_uses_ppi == ARCH_TIMER_PHYS_SECURE_PPI &&
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
}
static u32 check_ppi_trigger(int irq)
@@ -469,14 +469,15 @@ static int arch_timer_starting_cpu(unsigned int cpu)
struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
u32 flags;
- __arch_timer_setup(ARCH_CP15_TIMER, clk);
+ __arch_timer_setup(ARCH_TIMER_TYPE_CP15, clk);
flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]);
enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags);
if (arch_timer_has_nonsecure_ppi()) {
- flags = check_ppi_trigger(arch_timer_ppi[PHYS_NONSECURE_PPI]);
- enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], flags);
+ flags = check_ppi_trigger(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
+ enable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
+ flags);
}
arch_counter_set_user_access();
@@ -513,16 +514,17 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
static void arch_timer_banner(unsigned type)
{
pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
- type & ARCH_CP15_TIMER ? "cp15" : "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
- type & ARCH_MEM_TIMER ? "mmio" : "",
+ type & ARCH_TIMER_TYPE_CP15 ? "cp15" : "",
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
+ " and " : "",
+ type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
(unsigned long)arch_timer_rate / 1000000,
(unsigned long)(arch_timer_rate / 10000) % 100,
- type & ARCH_CP15_TIMER ?
- (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+ type & ARCH_TIMER_TYPE_CP15 ?
+ (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) ? "virt" : "phys" :
"",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
- type & ARCH_MEM_TIMER ?
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ? "/" : "",
+ type & ARCH_TIMER_TYPE_MEM ?
arch_timer_mem_use_virtual ? "virt" : "phys" :
"");
}
@@ -588,8 +590,9 @@ static void __init arch_counter_register(unsigned type)
u64 start_count;
/* Register the CP15 based counter if we have one */
- if (type & ARCH_CP15_TIMER) {
- if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
+ if (type & ARCH_TIMER_TYPE_CP15) {
+ if (IS_ENABLED(CONFIG_ARM64) ||
+ arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
arch_timer_read_counter = arch_counter_get_cntvct;
else
arch_timer_read_counter = arch_counter_get_cntpct;
@@ -625,7 +628,7 @@ static void arch_timer_stop(struct clock_event_device *clk)
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
if (arch_timer_has_nonsecure_ppi())
- disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ disable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
clk->set_state_shutdown(clk);
}
@@ -688,24 +691,24 @@ static int __init arch_timer_register(void)
ppi = arch_timer_ppi[arch_timer_uses_ppi];
switch (arch_timer_uses_ppi) {
- case VIRT_PPI:
+ case ARCH_TIMER_VIRT_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_virt,
"arch_timer", arch_timer_evt);
break;
- case PHYS_SECURE_PPI:
- case PHYS_NONSECURE_PPI:
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
- if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
- ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
+ if (!err && arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]) {
+ ppi = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
if (err)
- free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI],
arch_timer_evt);
}
break;
- case HYP_PPI:
+ case ARCH_TIMER_HYP_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
break;
@@ -737,7 +740,7 @@ static int __init arch_timer_register(void)
out_unreg_notify:
free_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], arch_timer_evt);
if (arch_timer_has_nonsecure_ppi())
- free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
arch_timer_evt);
out_free:
@@ -758,7 +761,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
t->base = base;
t->evt.irq = irq;
- __arch_timer_setup(ARCH_MEM_TIMER, &t->evt);
+ __arch_timer_setup(ARCH_TIMER_TYPE_MEM, &t->evt);
if (arch_timer_mem_use_virtual)
func = arch_timer_handler_virt_mem;
@@ -801,13 +804,15 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
static int __init arch_timer_common_init(void)
{
- unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
+ unsigned int mask = ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM;
/* Wait until both nodes are probed if we have two timers */
if ((arch_timers_present & mask) != mask) {
- if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
+ if (arch_timer_needs_probing(ARCH_TIMER_TYPE_MEM,
+ arch_timer_mem_of_match))
return 0;
- if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
+ if (arch_timer_needs_probing(ARCH_TIMER_TYPE_CP15,
+ arch_timer_of_match))
return 0;
}
@@ -832,16 +837,16 @@ static int __init arch_timer_init(void)
* their CNTHP_*_EL2 counterparts, and use a different PPI
* number.
*/
- if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
+ if (is_hyp_mode_available() || !arch_timer_ppi[ARCH_TIMER_VIRT_PPI]) {
bool has_ppi;
if (is_kernel_in_hyp_mode()) {
- arch_timer_uses_ppi = HYP_PPI;
- has_ppi = !!arch_timer_ppi[HYP_PPI];
+ arch_timer_uses_ppi = ARCH_TIMER_HYP_PPI;
+ has_ppi = !!arch_timer_ppi[ARCH_TIMER_HYP_PPI];
} else {
- arch_timer_uses_ppi = PHYS_SECURE_PPI;
- has_ppi = (!!arch_timer_ppi[PHYS_SECURE_PPI] ||
- !!arch_timer_ppi[PHYS_NONSECURE_PPI]);
+ arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
+ has_ppi = (!!arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] ||
+ !!arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
}
if (!has_ppi) {
@@ -858,7 +863,7 @@ static int __init arch_timer_init(void)
if (ret)
return ret;
- arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
+ arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
return 0;
}
@@ -867,13 +872,13 @@ static int __init arch_timer_of_init(struct device_node *np)
{
int i;
- if (arch_timers_present & ARCH_CP15_TIMER) {
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
pr_warn("multiple nodes in dt, skipping\n");
return 0;
}
- arch_timers_present |= ARCH_CP15_TIMER;
- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
+ for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
arch_timer_detect_rate(NULL, np);
@@ -895,7 +900,7 @@ static int __init arch_timer_of_init(struct device_node *np)
*/
if (IS_ENABLED(CONFIG_ARM) &&
of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
- arch_timer_uses_ppi = PHYS_SECURE_PPI;
+ arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
return arch_timer_init();
}
@@ -909,7 +914,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
unsigned int irq, ret = -EINVAL;
u32 cnttidr;
- arch_timers_present |= ARCH_MEM_TIMER;
+ arch_timers_present |= ARCH_TIMER_TYPE_MEM;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
pr_err("Can't find CNTCTLBase\n");
@@ -1008,28 +1013,28 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
{
struct acpi_table_gtdt *gtdt;
- if (arch_timers_present & ARCH_CP15_TIMER) {
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
pr_warn("already initialized, skipping\n");
return -EINVAL;
}
gtdt = container_of(table, struct acpi_table_gtdt, header);
- arch_timers_present |= ARCH_CP15_TIMER;
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
- arch_timer_ppi[PHYS_SECURE_PPI] =
+ arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] =
map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
gtdt->secure_el1_flags);
- arch_timer_ppi[PHYS_NONSECURE_PPI] =
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
gtdt->non_secure_el1_flags);
- arch_timer_ppi[VIRT_PPI] =
+ arch_timer_ppi[ARCH_TIMER_VIRT_PPI] =
map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
gtdt->virtual_timer_flags);
- arch_timer_ppi[HYP_PPI] =
+ arch_timer_ppi[ARCH_TIMER_HYP_PPI] =
map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
gtdt->non_secure_el2_flags);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index d23c381..2625ff1 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -20,18 +20,18 @@
#include <linux/timecounter.h>
#include <linux/types.h>
-#define ARCH_CP15_TIMER BIT(0)
-#define ARCH_MEM_TIMER BIT(1)
+#define ARCH_TIMER_TYPE_CP15 BIT(0)
+#define ARCH_TIMER_TYPE_MEM BIT(1)
-#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
-#define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
-#define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
+#define ARCH_TIMER_CTRL_ENABLE BIT(0)
+#define ARCH_TIMER_CTRL_IT_MASK BIT(1)
+#define ARCH_TIMER_CTRL_IT_STAT BIT(2)
-#define CNTHCTL_EL1PCTEN (1 << 0)
-#define CNTHCTL_EL1PCEN (1 << 1)
-#define CNTHCTL_EVNTEN (1 << 2)
-#define CNTHCTL_EVNTDIR (1 << 3)
-#define CNTHCTL_EVNTI (0xF << 4)
+#define ARCH_TIMER_CNTHCTL_EL1PCTEN BIT(0)
+#define ARCH_TIMER_CNTHCTL_EL1PCEN BIT(1)
+#define ARCH_TIMER_CNTHCTL_EVNTEN BIT(2)
+#define ARCH_TIMER_CNTHCTL_EVNTDIR BIT(3)
+#define ARCH_TIMER_CNTHCTL_EVNTI (0xF << 4)
enum arch_timer_reg {
ARCH_TIMER_REG_CTRL,
@@ -39,11 +39,11 @@ enum arch_timer_reg {
};
enum arch_timer_ppi_nr {
- PHYS_SECURE_PPI,
- PHYS_NONSECURE_PPI,
- VIRT_PPI,
- HYP_PPI,
- MAX_TIMER_PPI
+ ARCH_TIMER_PHYS_SECURE_PPI,
+ ARCH_TIMER_PHYS_NONSECURE_PPI,
+ ARCH_TIMER_VIRT_PPI,
+ ARCH_TIMER_HYP_PPI,
+ ARCH_TIMER_MAX_TIMER_PPI
};
enum arch_timer_spi_nr {
@@ -57,13 +57,13 @@ enum arch_timer_spi_nr {
#define ARCH_TIMER_MEM_PHYS_ACCESS 2
#define ARCH_TIMER_MEM_VIRT_ACCESS 3
-#define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */
-#define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */
-#define ARCH_TIMER_VIRT_EVT_EN (1 << 2)
+#define ARCH_TIMER_USR_PCT_ACCESS_EN BIT(0) /* physical counter */
+#define ARCH_TIMER_USR_VCT_ACCESS_EN BIT(1) /* virtual counter */
+#define ARCH_TIMER_VIRT_EVT_EN BIT(2)
#define ARCH_TIMER_EVT_TRIGGER_SHIFT (4)
#define ARCH_TIMER_EVT_TRIGGER_MASK (0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT)
-#define ARCH_TIMER_USR_VT_ACCESS_EN (1 << 8) /* virtual timer registers */
-#define ARCH_TIMER_USR_PT_ACCESS_EN (1 << 9) /* physical timer registers */
+#define ARCH_TIMER_USR_VT_ACCESS_EN BIT(8) /* virtual timer registers */
+#define ARCH_TIMER_USR_PT_ACCESS_EN BIT(9) /* physical timer registers */
#define ARCH_TIMER_EVT_STREAM_FREQ 10000 /* 100us */
diff --git a/virt/kvm/arm/hyp/timer-sr.c b/virt/kvm/arm/hyp/timer-sr.c
index 798866a..695b9d9 100644
--- a/virt/kvm/arm/hyp/timer-sr.c
+++ b/virt/kvm/arm/hyp/timer-sr.c
@@ -37,7 +37,7 @@ void __hyp_text __timer_save_state(struct kvm_vcpu *vcpu)
/* Allow physical timer/counter access for the host */
val = read_sysreg(cnthctl_el2);
- val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN;
+ val |= ARCH_TIMER_CNTHCTL_EL1PCTEN | ARCH_TIMER_CNTHCTL_EL1PCEN;
write_sysreg(val, cnthctl_el2);
/* Clear cntvoff for the host */
@@ -55,8 +55,8 @@ void __hyp_text __timer_restore_state(struct kvm_vcpu *vcpu)
* Physical counter access is allowed
*/
val = read_sysreg(cnthctl_el2);
- val &= ~CNTHCTL_EL1PCEN;
- val |= CNTHCTL_EL1PCTEN;
+ val &= ~ARCH_TIMER_CNTHCTL_EL1PCEN;
+ val |= ARCH_TIMER_CNTHCTL_EL1PCTEN;
write_sysreg(val, cnthctl_el2);
if (timer->enabled) {
--
2.7.4
next prev parent reply other threads:[~2016-11-16 13:48 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-16 13:48 [PATCH v16 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2016-11-16 13:48 ` [PATCH v16 01/15] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei at linaro.org
2016-11-16 13:48 ` [PATCH v16 02/15] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2016-11-16 13:48 ` [PATCH v16 03/15] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2016-11-16 13:48 ` fu.wei at linaro.org [this message]
2016-11-18 18:49 ` [PATCH v16 04/15] clocksource/drivers/arm_arch_timer: rename some enums and defines, and some cleanups Mark Rutland
2016-11-21 6:11 ` Fu Wei
2016-11-16 13:48 ` [PATCH v16 05/15] clocksource/drivers/arm_arch_timer: fix a bug in arch_timer_register about arch_timer_uses_ppi fu.wei at linaro.org
2016-11-18 18:52 ` Mark Rutland
2016-11-21 7:32 ` Fu Wei
2016-11-16 13:48 ` [PATCH v16 06/15] clocksource/drivers/arm_arch_timer: separate out arch_timer_uses_ppi init code to prepare for GTDT fu.wei at linaro.org
2016-11-18 19:30 ` Mark Rutland
2016-11-21 9:45 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 07/15] clocksource/drivers/arm_arch_timer: Refactor arch_timer_detect_rate to keep dt code in *_of_init fu.wei at linaro.org
2016-11-18 19:52 ` Mark Rutland
2016-11-21 14:08 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 08/15] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing, and call it only if acpi disabled fu.wei at linaro.org
2016-11-18 19:56 ` Mark Rutland
2016-11-21 14:38 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 09/15] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei at linaro.org
2016-11-16 13:49 ` [PATCH v16 10/15] clocksource/drivers/arm_arch_timer: Refactor the timer init code " fu.wei at linaro.org
2016-11-18 20:03 ` Mark Rutland
2016-11-23 6:10 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 11/15] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2016-11-18 20:12 ` Mark Rutland
2016-11-23 12:06 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 12/15] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2016-11-16 13:49 ` [PATCH v16 13/15] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2016-11-18 14:22 ` Lorenzo Pieralisi
2016-11-23 11:53 ` Fu Wei
2016-11-24 3:57 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 14/15] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2016-11-18 20:20 ` Mark Rutland
2016-11-23 12:15 ` Fu Wei
2016-11-16 13:49 ` [PATCH v16 15/15] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2016-11-17 3:34 ` [PATCH v16 00/15] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Xiongfeng Wang
2016-11-17 9:25 ` Xiongfeng Wang
2016-11-17 11:13 ` Fu Wei
2016-11-17 9:47 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479304148-2965-5-git-send-email-fu.wei@linaro.org \
--to=fu.wei@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).