From mboxrd@z Thu Jan 1 00:00:00 1970 From: j-keerthy@ti.com (Keerthy) Date: Thu, 24 Nov 2016 11:49:15 +0530 Subject: [PATCH 2/2] ARM: omap: timers: reduce rating of gp_timer clocksource In-Reply-To: <1479968355-18860-1-git-send-email-j-keerthy@ti.com> References: <1479968355-18860-1-git-send-email-j-keerthy@ti.com> Message-ID: <1479968355-18860-2-git-send-email-j-keerthy@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Grygorii Strashko Now ARM Global timer (rating 300) will not be selected as clocksource, because it's initialized after OMAP GP Timer (rating 300) and Timekeeping core will not allow to replace clocksource with new one if both of them have the same rating. Reduce rating of OMAP GP Timer (300->290) when it's used as clocksource device - this will allow to select ARM Global timer (300) as clocksource when enabled. Signed-off-by: Grygorii Strashko Signed-off-by: Dave Gerlach Signed-off-by: Keerthy --- arch/arm/mach-omap2/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b2f2448..a0dbb0b 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -376,7 +376,7 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .rating = 300, + .rating = 290, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, -- 1.9.1