[PATCH v2 0/2] ARM: dts: da850: tilcdc related DT changes

[PATCH v2 0/2] ARM: dts: da850: tilcdc related DT changes

[Bartosz Golaszewski]

This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.

v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting

Bartosz Golaszewski (2):
  ARM: dts: da850-lcdk: add the dumb-vga-dac node
  ARM: dts: da850-lcdk: specify the maximum pixel clock rate for tilcdc

 arch/arm/boot/dts/da850-lcdk.dts | 59 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi     | 17 ++++++++++++
 2 files changed, 76 insertions(+)

-- 
2.9.3

[PATCH v2 1/2] ARM: dts: da850-lcdk: add the dumb-vga-dac node

[Bartosz Golaszewski]

Add the dumb-vga-dac node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 58 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi     | 17 ++++++++++++
 2 files changed, 75 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 711b9ad..d864f11 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -50,6 +50,53 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga_bridge {
+		compatible = "dumb-vga-dac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&display_out_vga>;
+				};
+			};
+
+			port at 1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -235,3 +282,14 @@
 &memctrl {
 	status = "okay";
 };
+
+&display {
+	status = "okay";
+};
+
+&display_out {
+	display_out_vga: endpoint at 0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 4070619..5f4ba2e 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -454,6 +454,23 @@
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				display_in: port at 0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				display_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
 		};
 	};
 	aemif: aemif at 68000000 {
-- 
2.9.3

[PATCH v2 2/2] ARM: dts: da850-lcdk: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

Due to memory throughput constraints any display mode for which the
pixel clock rate exceeds the recommended value of 37500 KHz must be
filtered out.

Specify the max-pixelclock property for the display node for
da850-lcdk.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index d864f11..1283263 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -285,6 +285,7 @@
 
 &display {
 	status = "okay";
+	max-pixelclock = <37500>;
 };
 
 &display_out {
-- 
2.9.3

[PATCH v2 2/2] ARM: dts: da850-lcdk: specify the maximum pixel clock rate for tilcdc

[Sekhar Nori]

On Monday 28 November 2016 05:45 PM, Bartosz Golaszewski wrote:
> Due to memory throughput constraints any display mode for which the
> pixel clock rate exceeds the recommended value of 37500 KHz must be
> filtered out.

I think there might be more reasons than memory throughput constraints
for the reasoning behind 37.5Mhz cap on pixel clock. Why not just refer
to the datasheet section that places this constraint so we know its a
hardware restriction.

> 
> Specify the max-pixelclock property for the display node for
> da850-lcdk.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-lcdk.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
> index d864f11..1283263 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -285,6 +285,7 @@
>  
>  &display {
>  	status = "okay";
> +	max-pixelclock = <37500>;

Should this not be in da850.dtsi since its an SoC imposed constraint? If
a board needs narrower constraint, it can override it. But I guess most
well designed boards will just hit the SoC constraint.

Thanks,
Sekhar

[PATCH v2 2/2] ARM: dts: da850-lcdk: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

2016-11-29 11:53 GMT+01:00 Sekhar Nori <nsekhar@ti.com>:
> On Monday 28 November 2016 05:45 PM, Bartosz Golaszewski wrote:
>> Due to memory throughput constraints any display mode for which the
>> pixel clock rate exceeds the recommended value of 37500 KHz must be
>> filtered out.
>
> I think there might be more reasons than memory throughput constraints
> for the reasoning behind 37.5Mhz cap on pixel clock. Why not just refer
> to the datasheet section that places this constraint so we know its a
> hardware restriction.
>
>>
>> Specify the max-pixelclock property for the display node for
>> da850-lcdk.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>> ---
>>  arch/arm/boot/dts/da850-lcdk.dts | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
>> index d864f11..1283263 100644
>> --- a/arch/arm/boot/dts/da850-lcdk.dts
>> +++ b/arch/arm/boot/dts/da850-lcdk.dts
>> @@ -285,6 +285,7 @@
>>
>>  &display {
>>       status = "okay";
>> +     max-pixelclock = <37500>;
>
> Should this not be in da850.dtsi since its an SoC imposed constraint? If
> a board needs narrower constraint, it can override it. But I guess most
> well designed boards will just hit the SoC constraint.
>

Both issues fixed in v3.

Thanks,
Bartosz Golaszewski