From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes
Date: Thu, 1 Dec 2016 10:05:58 +0100 [thread overview]
Message-ID: <1480583160-31806-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1480583160-31806-1-git-send-email-narmstrong@baylibre.com>
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 ++++
8 files changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fc033c0..eada0b5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -356,5 +356,21 @@
status = "disabled";
};
};
+
+ vpu: vpu at d0100000 {
+ compatible = "amlogic,meson-gx-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port at 0 {
+ reg = <0>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 9696820..4cbd626 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -142,6 +142,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -229,3 +239,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 203be28..4a96e0f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -125,6 +125,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -234,3 +244,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ac5ad3b..5353a20 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -506,3 +506,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
index e99101a..cea4a3e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
@@ -117,6 +117,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -203,3 +213,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 9f89b99..5c7a8fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -299,3 +299,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index d320727..f2d0861 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -90,6 +90,16 @@
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -167,3 +177,9 @@
max-speed = <1000>;
};
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index c1974bb..eb2f0c3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -112,3 +112,7 @@
};
};
};
+
+&vpu {
+ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
--
1.9.1
next prev parent reply other threads:[~2016-12-01 9:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-01 9:05 [PATCH v3 0/4] drm: Add support for the Amlogic Video Processing Unit Neil Armstrong
2016-12-01 9:05 ` Neil Armstrong [this message]
2016-12-01 9:05 ` [PATCH v3 3/4] dt-bindings: display: add Amlogic Meson DRM Bindings Neil Armstrong
2016-12-06 0:26 ` Rob Herring
2016-12-01 9:06 ` [PATCH v3 4/4] MAINTAINERS: add entry for Amlogic DRM drivers Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480583160-31806-3-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox