[PATCH v2] ARM: dts: lpc32xx: add pwm-cells to base dts file

[PATCH v2] ARM: dts: lpc32xx: add pwm-cells to base dts file

[Sylvain Lemieux]

From: Sylvain Lemieux <slemieux@tycoint.com>

There is no need to define the "pwm-cells" in the board
specific dts file; move the entry to the base dts file.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
---
Changes in v2:
* Update the "pwm-cells" to be compatible with the latest
  lpc32xx-pwm driver implementation.

Note:
* This patch have a dependency on the following patcheset:
  "pwm: lpc32xx: switch driver to one phandle argument for PWM consumers"
  http://www.spinics.net/lists/arm-kernel/msg547013.html

 arch/arm/boot/dts/lpc32xx.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 218d9fa..c031c94 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -472,6 +472,7 @@
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
+				#pwm-cells = <1>;
 			};
 
 			pwm2: pwm at 4005C004 {
@@ -481,6 +482,7 @@
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
+				#pwm-cells = <1>;
 			};
 
 			timer3: timer at 40060000 {
-- 
1.8.3.1

[PATCH v2] ARM: dts: lpc32xx: add pwm-cells to base dts file

[Vladimir Zapolskiy]

Hi Sylvain,

On 12/07/2016 09:30 PM, Sylvain Lemieux wrote:
> From: Sylvain Lemieux <slemieux@tycoint.com>
> 
> There is no need to define the "pwm-cells" in the board
> specific dts file; move the entry to the base dts file.
> 
> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
> ---

thank you for the change,

Acked-by: Vladimir Zapolskiy <vz@mleia.com>

--
With best wishes,
Vladimir