linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ASoC: samsung: Remove tests of member address
Date: Sat, 10 Dec 2016 11:51:11 +0200	[thread overview]
Message-ID: <1481363471-21364-1-git-send-email-krzk@kernel.org> (raw)

The driver was checking for non-NULL address of struct's members:
 - s3c_audio_pdata->type (union),
 - s3c_audio_pdata->type.i2s (embedded struct).

This is pointless as these will be always non-NULL.  The 's3c_audio_pdata'
is always initialized in static memory so it will be zeroed.
Additionally the 'type' member was an union with only one member.

It is safe to reorganize the structures to get rid of useless union and
checks for addresses to fix the coccinelle warning:
	>> sound/soc/samsung/i2s.c:1270:2-4: ERROR: test of a variable/field address

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested on the hardware.
---
 arch/arm/mach-s3c64xx/dev-audio.c      |  4 +---
 include/linux/platform_data/asoc-s3c.h |  6 ++----
 sound/soc/samsung/i2s.c                | 10 ++--------
 3 files changed, 5 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index b57783371d52..247dcc0b691e 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -106,9 +106,7 @@ static struct s3c_audio_pdata i2sv4_pdata = {
 	.dma_playback = DMACH_HSI_I2SV40_TX,
 	.dma_capture = DMACH_HSI_I2SV40_RX,
 	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN,
-		},
+		.quirks = QUIRK_PRI_6CHAN,
 	},
 };
 
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h
index 15bf56ee8af7..90641a5daaf0 100644
--- a/include/linux/platform_data/asoc-s3c.h
+++ b/include/linux/platform_data/asoc-s3c.h
@@ -18,7 +18,7 @@
 
 extern void s3c64xx_ac97_setup_gpio(int);
 
-struct samsung_i2s {
+struct samsung_i2s_type {
 /* If the Primary DAI has 5.1 Channels */
 #define QUIRK_PRI_6CHAN		(1 << 0)
 /* If the I2S block has a Stereo Overlay Channel */
@@ -47,7 +47,5 @@ struct s3c_audio_pdata {
 	void *dma_capture;
 	void *dma_play_sec;
 	void *dma_capture_mic;
-	union {
-		struct samsung_i2s i2s;
-	} type;
+	struct samsung_i2s_type type;
 };
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index e00974bc5616..d55326289a4a 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1218,7 +1218,6 @@ static int samsung_i2s_probe(struct platform_device *pdev)
 {
 	struct i2s_dai *pri_dai, *sec_dai = NULL;
 	struct s3c_audio_pdata *i2s_pdata = pdev->dev.platform_data;
-	struct samsung_i2s *i2s_cfg = NULL;
 	struct resource *res;
 	u32 regs_base, quirks = 0, idma_addr = 0;
 	struct device_node *np = pdev->dev.of_node;
@@ -1267,13 +1266,8 @@ static int samsung_i2s_probe(struct platform_device *pdev)
 		pri_dai->dma_capture.filter_data = i2s_pdata->dma_capture;
 		pri_dai->filter = i2s_pdata->dma_filter;
 
-		if (&i2s_pdata->type)
-			i2s_cfg = &i2s_pdata->type.i2s;
-
-		if (i2s_cfg) {
-			quirks = i2s_cfg->quirks;
-			idma_addr = i2s_cfg->idma_addr;
-		}
+		quirks = i2s_pdata->type.quirks;
+		idma_addr = i2s_pdata->type.idma_addr;
 	} else {
 		quirks = i2s_dai_data->quirks;
 		if (of_property_read_u32(np, "samsung,idma-addr",
-- 
2.7.4

             reply	other threads:[~2016-12-10  9:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-10  9:51 Krzysztof Kozlowski [this message]
2016-12-12 13:35 ` [PATCH] ASoC: samsung: Remove tests of member address Bartlomiej Zolnierkiewicz
2016-12-15 12:21 ` Applied "ASoC: samsung: Remove tests of member address" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481363471-21364-1-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).