linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: zhangqing@rock-chips.com (Elaine Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 3/3] clk: rockchip: add new pll-type for rk3328 and similar socs
Date: Tue, 13 Dec 2016 16:47:49 +0800	[thread overview]
Message-ID: <1481618869-1239-4-git-send-email-zhangqing@rock-chips.com> (raw)
In-Reply-To: <1481618869-1239-1-git-send-email-zhangqing@rock-chips.com>

The rk3328's pll and clock are similar with rk3036's,
it different with pll_mode_mask,there are different
adjust foctors and control registers,
so these should be independent and separate from
the series of rk3328s.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/clk/rockchip/clk-pll.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index 6ed605776abd..9650c75f61d1 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -29,6 +29,7 @@
 #define PLL_MODE_SLOW		0x0
 #define PLL_MODE_NORM		0x1
 #define PLL_MODE_DEEP		0x2
+#define PLL_RK3328_MODE_MASK	0x1
 
 struct rockchip_clk_pll {
 	struct clk_hw		hw;
@@ -865,13 +866,17 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
 	pll_mux = &pll->pll_mux;
 	pll_mux->reg = ctx->reg_base + mode_offset;
 	pll_mux->shift = mode_shift;
-	pll_mux->mask = PLL_MODE_MASK;
+	if (pll_type == pll_rk3328)
+		pll_mux->mask = PLL_RK3328_MODE_MASK;
+	else
+		pll_mux->mask = PLL_MODE_MASK;
 	pll_mux->flags = 0;
 	pll_mux->lock = &ctx->lock;
 	pll_mux->hw.init = &init;
 
 	if (pll_type == pll_rk3036 ||
 	    pll_type == pll_rk3066 ||
+	    pll_type == pll_rk3328 ||
 	    pll_type == pll_rk3399)
 		pll_mux->flags |= CLK_MUX_HIWORD_MASK;
 
@@ -929,6 +934,12 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
 		else
 			init.ops = &rockchip_rk3066_pll_clk_ops;
 		break;
+	case pll_rk3328:
+		if (!pll->rate_table || IS_ERR(ctx->grf))
+			init.ops = &rockchip_rk3036_pll_clk_norate_ops;
+		else
+			init.ops = &rockchip_rk3036_pll_clk_ops;
+		break;
 	case pll_rk3399:
 		if (!pll->rate_table)
 			init.ops = &rockchip_rk3399_pll_clk_norate_ops;
-- 
1.9.1

      parent reply	other threads:[~2016-12-13  8:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-13  8:47 [PATCH v1 0/3] clk: rockchip: support clk controller for rk3328 SoC Elaine Zhang
2016-12-13  8:47 ` [PATCH v1 1/3] clk: rockchip: add dt-binding header for rk3328 Elaine Zhang
2016-12-13  8:47 ` [PATCH v1 2/3] clk: rockchip: add clock controller " Elaine Zhang
2016-12-13  9:38   ` Shawn Lin
2016-12-13  8:47 ` Elaine Zhang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481618869-1239-4-git-send-email-zhangqing@rock-chips.com \
    --to=zhangqing@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).