From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Thu, 12 Jan 2017 15:56:19 +0530 Subject: [PATCH 30/37] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode In-Reply-To: <1484216786-17292-1-git-send-email-kishon@ti.com> References: <1484216786-17292-1-git-send-email-kishon@ti.com> Message-ID: <1484216786-17292-31-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update device tree binding documentation of TI's dra7xx PCI controller to include property for enabling legacy mode. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 62f5f59..ed85e8e 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -39,6 +39,10 @@ DEVICE MODE - interrupts : one interrupt entries must be specified for main interrupt. - num-ib-windows : number of inbound address translation windows - num-ob-windows : number of outbound address translation windows + - syscon-legacy-mode: phandle to the syscon dt node. The 1st argument should + contain the register offset within syscon and the 2nd + argument should contain the bit field for setting the + legacy mode Optional Property: - gpios : Should be added if a gpio line is required to drive PERST# line -- 1.7.9.5