* [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410
@ 2017-01-15 2:29 Dan Haab
2017-01-15 2:29 ` [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200 Dan Haab
2017-01-18 1:06 ` [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Florian Fainelli
0 siblings, 2 replies; 4+ messages in thread
From: Dan Haab @ 2017-01-15 2:29 UTC (permalink / raw)
To: linux-arm-kernel
Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
serial flash. It has 3 LEDs and just one (reset) button.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++
2 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cccdbcb..04fd8f0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm47081-luxul-xap-1410.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 0000000..9b57598
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XAP-1410 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200
2017-01-15 2:29 [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Dan Haab
@ 2017-01-15 2:29 ` Dan Haab
2017-01-18 1:06 ` Florian Fainelli
2017-01-18 1:06 ` [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Florian Fainelli
1 sibling, 1 reply; 4+ messages in thread
From: Dan Haab @ 2017-01-15 2:29 UTC (permalink / raw)
To: linux-arm-kernel
Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
flash (for bootloader and NVRAM) and NAND flash (for firmware).
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 +++++++++++++++++++++++++
2 files changed, 108 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 04fd8f0..8a403a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm47081-luxul-xap-1410.dtb \
+ bcm47081-luxul-xwr-1200.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 0000000..c544ab3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XWR-1200 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan4";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200
2017-01-15 2:29 ` [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200 Dan Haab
@ 2017-01-18 1:06 ` Florian Fainelli
0 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2017-01-18 1:06 UTC (permalink / raw)
To: linux-arm-kernel
On 01/14/2017 06:29 PM, Dan Haab wrote:
> Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
> flash (for bootloader and NVRAM) and NAND flash (for firmware).
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
Applied thanks
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410
2017-01-15 2:29 [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Dan Haab
2017-01-15 2:29 ` [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200 Dan Haab
@ 2017-01-18 1:06 ` Florian Fainelli
1 sibling, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2017-01-18 1:06 UTC (permalink / raw)
To: linux-arm-kernel
On 01/14/2017 06:29 PM, Dan Haab wrote:
> Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
> serial flash. It has 3 LEDs and just one (reset) button.
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
> ---
Applied, thanks
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-01-18 1:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-15 2:29 [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Dan Haab
2017-01-15 2:29 ` [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-1200 Dan Haab
2017-01-18 1:06 ` Florian Fainelli
2017-01-18 1:06 ` [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1410 Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).