[PATCH v3 0/2] Add USB DRD 3.0 device node for Exynos7

[pankaj.dubey@samsung.com (Pankaj Dubey)]

This patch series adds USB 3.0 DRD device node for Exynos7 and 
required Vbus and Vbus-boost support for espresso dev boards.
These patches are part of patch series [1] earlier submitted by Vivek


While other patches in these series got merged, DTS related change were
left. I have prepared and tested these patches on top of krzk/for-next and
my patch series "Use macros for pinctrl configuration on Exynos7" [2].

[1]: https://lkml.org/lkml/2014/11/21/247
[2]: https://www.spinics.net/lists/arm-kernel/msg555333.html

Changes since v1:
 - Updated S-o-B order and Authorship of patches.
 - Added Javier's Reviewed-by.
 - Replaced GPIO polarity values with appropriate macros.

Changes since v2:
 - Changed order of S-o-B and R-o-B lines
 - Removed address node from parent usb node
 - Replaced pinctrl configuration values with macros

Vivek Gautam (2):
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost

 arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         | 34 +++++++++++++++++++
 2 files changed, 79 insertions(+)

-- 
2.7.4