From mboxrd@z Thu Jan 1 00:00:00 1970 From: javier@osg.samsung.com (Javier Martinez Canillas) Date: Wed, 18 Jan 2017 12:50:13 -0300 Subject: [PATCH v3] arm64: dts: exynos: Remove unneeded unit names in Exynos5433 nodes Message-ID: <1484754613-2425-1-git-send-email-javier@osg.samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The "samsung,exynos5433-mipi-video-phy" and "samsung,exynos5250-dwusb3" DT bindings don't specify a reg property for these nodes, so having a unit name leads to the following DTC warnings: Node /soc/video-phy at 105c0710 has a unit name, but no reg property Node /soc/usb at 15400000 has a unit name, but no reg property Node /soc/usb at 15a00000 has a unit name, but no reg property Signed-off-by: Javier Martinez Canillas --- Changes in v3: - Use proper device node names, suggested by Krzysztof. Changes in v2: - Fix subject line since I forgot the "exynos" prefix. arch/arm64/boot/dts/exynos/exynos5433.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 59788d89b686..57c7bbeb65a7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -706,7 +706,7 @@ interrupts = ; }; - mipi_phy: video-phy at 105c0710 { + mipi_phy: video-phy { compatible = "samsung,exynos5433-mipi-video-phy"; #phy-cells = <1>; samsung,pmu-syscon = <&pmu_system_controller>; @@ -1357,7 +1357,7 @@ status = "disabled"; }; - usbdrd30: usb at 15400000 { + usbdrd30: usbdrd { compatible = "samsung,exynos5250-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>; @@ -1404,7 +1404,7 @@ status = "disabled"; }; - usbhost30: usb at 15a00000 { + usbhost30: usbhost { compatible = "samsung,exynos5250-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>; -- 2.7.4