From: roy.pledge@nxp.com (Roy Pledge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/10] soc/qbman: different register offsets on ARM
Date: Wed, 18 Jan 2017 17:39:38 -0500 [thread overview]
Message-ID: <1484779180-1344-9-git-send-email-roy.pledge@nxp.com> (raw)
In-Reply-To: <1484779180-1344-1-git-send-email-roy.pledge@nxp.com>
From: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
---
drivers/soc/fsl/qbman/bman.c | 22 ++++++++++++++++++++++
drivers/soc/fsl/qbman/qman.c | 38 ++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index 3acded1..1fa9099 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -35,6 +35,27 @@
/* Portal register assists */
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+/* Cache-inhibited register offsets */
+#define BM_REG_RCR_PI_CINH 0x3000
+#define BM_REG_RCR_CI_CINH 0x3100
+#define BM_REG_RCR_ITR 0x3200
+#define BM_REG_CFG 0x3300
+#define BM_REG_SCN(n) (0x3400 + ((n) << 6))
+#define BM_REG_ISR 0x3e00
+#define BM_REG_IER 0x3e40
+#define BM_REG_ISDR 0x3e80
+#define BM_REG_IIR 0x3ec0
+
+/* Cache-enabled register offsets */
+#define BM_CL_CR 0x0000
+#define BM_CL_RR0 0x0100
+#define BM_CL_RR1 0x0140
+#define BM_CL_RCR 0x1000
+#define BM_CL_RCR_PI_CENA 0x3000
+#define BM_CL_RCR_CI_CENA 0x3100
+
+#else
/* Cache-inhibited register offsets */
#define BM_REG_RCR_PI_CINH 0x0000
#define BM_REG_RCR_CI_CINH 0x0004
@@ -53,6 +74,7 @@
#define BM_CL_RCR 0x1000
#define BM_CL_RCR_PI_CENA 0x3000
#define BM_CL_RCR_CI_CENA 0x3100
+#endif
/*
* Portal modes.
diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 879e8f2..d67b8e1 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -41,6 +41,43 @@
/* Portal register assists */
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+/* Cache-inhibited register offsets */
+#define QM_REG_EQCR_PI_CINH 0x3000
+#define QM_REG_EQCR_CI_CINH 0x3040
+#define QM_REG_EQCR_ITR 0x3080
+#define QM_REG_DQRR_PI_CINH 0x3100
+#define QM_REG_DQRR_CI_CINH 0x3140
+#define QM_REG_DQRR_ITR 0x3180
+#define QM_REG_DQRR_DCAP 0x31C0
+#define QM_REG_DQRR_SDQCR 0x3200
+#define QM_REG_DQRR_VDQCR 0x3240
+#define QM_REG_DQRR_PDQCR 0x3280
+#define QM_REG_MR_PI_CINH 0x3300
+#define QM_REG_MR_CI_CINH 0x3340
+#define QM_REG_MR_ITR 0x3380
+#define QM_REG_CFG 0x3500
+#define QM_REG_ISR 0x3600
+#define QM_REG_IER 0x3640
+#define QM_REG_ISDR 0x3680
+#define QM_REG_IIR 0x36C0
+#define QM_REG_ITPR 0x3740
+
+/* Cache-enabled register offsets */
+#define QM_CL_EQCR 0x0000
+#define QM_CL_DQRR 0x1000
+#define QM_CL_MR 0x2000
+#define QM_CL_EQCR_PI_CENA 0x3000
+#define QM_CL_EQCR_CI_CENA 0x3040
+#define QM_CL_DQRR_PI_CENA 0x3100
+#define QM_CL_DQRR_CI_CENA 0x3140
+#define QM_CL_MR_PI_CENA 0x3300
+#define QM_CL_MR_CI_CENA 0x3340
+#define QM_CL_CR 0x3800
+#define QM_CL_RR0 0x3900
+#define QM_CL_RR1 0x3940
+
+#else
/* Cache-inhibited register offsets */
#define QM_REG_EQCR_PI_CINH 0x0000
#define QM_REG_EQCR_CI_CINH 0x0004
@@ -75,6 +112,7 @@
#define QM_CL_CR 0x3800
#define QM_CL_RR0 0x3900
#define QM_CL_RR1 0x3940
+#endif
/*
* BTW, the drivers (and h/w programming model) already obtain the required
--
1.7.9.5
next prev parent reply other threads:[~2017-01-18 22:39 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-18 22:39 [PATCH 00/10] fsl/qbman: ARM Enablement Roy Pledge
2017-01-18 22:39 ` [PATCH 01/10] soc/qbman: Use portable mapping for the FQD reserved memory Roy Pledge
2017-01-18 22:39 ` [PATCH 02/10] soc/qbman: Drop set/clear_bits usage Roy Pledge
2017-01-18 22:39 ` [PATCH 03/10] soc/qbman: Drop L1_CACHE_BYTES compile time check Roy Pledge
2017-01-18 22:39 ` [PATCH 04/10] soc/qbman: Fix ARM32 typo Roy Pledge
2017-01-18 22:39 ` [PATCH 05/10] soc/qbman: Rework ioremap() calls for ARM/PPC Roy Pledge
2017-01-18 22:39 ` [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range() Roy Pledge
2017-01-18 23:12 ` Russell King - ARM Linux
2017-01-18 23:36 ` Scott Wood
2017-01-23 19:24 ` Roy Pledge
2017-01-25 21:20 ` Arnd Bergmann
2017-01-26 5:08 ` Scott Wood
2017-01-27 16:41 ` Arnd Bergmann
2017-01-28 2:34 ` Scott Wood
2017-01-30 15:31 ` Robin Murphy
2017-01-30 19:04 ` Roy Pledge
2017-02-01 13:03 ` Robin Murphy
2017-02-01 22:51 ` Scott Wood
2017-02-06 22:26 ` Roy Pledge
2017-02-06 22:37 ` Russell King - ARM Linux
2017-02-07 16:44 ` Roy Pledge
2017-02-07 18:25 ` Robin Murphy
2017-02-13 21:26 ` Roy Pledge
2017-03-16 0:43 ` Roy Pledge
2017-03-16 20:08 ` Scott Wood
2017-03-29 21:19 ` Roy Pledge
2017-01-30 15:19 ` Russell King - ARM Linux
2017-02-01 12:47 ` Arnd Bergmann
2017-02-01 23:16 ` Russell King - ARM Linux
2017-02-02 17:21 ` Roy Pledge
2017-01-30 15:04 ` Russell King - ARM Linux
2017-02-01 12:52 ` Arnd Bergmann
2017-01-30 15:12 ` Russell King - ARM Linux
2017-01-18 22:39 ` [PATCH 07/10] soc/qbman: add QMAN_REV32 Roy Pledge
2017-01-18 22:39 ` Roy Pledge [this message]
2017-01-18 22:39 ` [PATCH 09/10] soc/qbman: Add missing headers on ARM Roy Pledge
2017-01-18 22:39 ` [PATCH 10/10] fsl/qbman: Enable FSL_LAYERSCAPE config " Roy Pledge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484779180-1344-9-git-send-email-roy.pledge@nxp.com \
--to=roy.pledge@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).