linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: geert+renesas@glider.be (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: shmobile: rcar-gen2: Add more register documentation
Date: Fri, 20 Jan 2017 14:04:08 +0100	[thread overview]
Message-ID: <1484917448-8320-1-git-send-email-geert+renesas@glider.be> (raw)

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 40 +++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index dd9ac366868f4336..6ed9aa19c4d34766 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -20,14 +20,30 @@
 
 /* RST */
 #define RST		0xe6160000
-#define CA15BAR		0x0020
-#define CA7BAR		0x0030
-#define CA15RESCNT	0x0040
-#define CA7RESCNT	0x0044
+
+#define CA15BAR		0x0020		/* CA15 Boot Address Register */
+#define CA7BAR		0x0030		/* CA7 Boot Address Register */
+#define CA15RESCNT	0x0040		/* CA15 Reset Control Register */
+#define CA7RESCNT	0x0044		/* CA7 Reset Control Register */
+
+/* SYS Boot Address Register */
+#define SBAR_BAREN	BIT(4)		/* SBAR is valid */
+
+/* Reset Control Registers */
+#define CA15RESCNT_CODE	0xa5a50000
+#define CA15RESCNT_CPUS	0xf		/* CPU0-3 */
+#define CA7RESCNT_CODE	0x5a5a0000
+#define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
+
 
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
+static inline u32 phys_to_sbar(phys_addr_t addr)
+{
+	return (((addr) >> 8) & 0xfffffc00);
+}
+
 /* SYSC */
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
@@ -82,22 +98,24 @@ void __init rcar_gen2_pm_init(void)
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = (boot_vector_addr >> 8) & 0xfffffc00;
+	bar = phys_to_sbar(boot_vector_addr);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
-		writel_relaxed(bar | 0x10, p + CA15BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
 
 		/* de-assert reset for CA15 CPUs */
-		writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) |
-				0xa5a50000, p + CA15RESCNT);
+		writel_relaxed((readl_relaxed(p + CA15RESCNT) &
+				~CA15RESCNT_CPUS) | CA15RESCNT_CODE,
+			       p + CA15RESCNT);
 	}
 	if (has_a7) {
 		writel_relaxed(bar, p + CA7BAR);
-		writel_relaxed(bar | 0x10, p + CA7BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA7BAR);
 
 		/* de-assert reset for CA7 CPUs */
-		writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) |
-				0x5a5a0000, p + CA7RESCNT);
+		writel_relaxed((readl_relaxed(p + CA7RESCNT) &
+				~CA7RESCNT_CPUS) | CA7RESCNT_CODE,
+			       p + CA7RESCNT);
 	}
 	iounmap(p);
 
-- 
1.9.1

             reply	other threads:[~2017-01-20 13:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20 13:04 Geert Uytterhoeven [this message]
2017-01-20 16:21 ` [PATCH] ARM: shmobile: rcar-gen2: Add more register documentation Sergei Shtylyov
2017-01-23  9:11   ` Geert Uytterhoeven
2017-01-23  9:35     ` Simon Horman
  -- strict thread matches above, loose matches on Subject: below --
2017-01-26 10:11 [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v4.11 Simon Horman
2017-01-26 10:11 ` [PATCH] ARM: shmobile: rcar-gen2: Add more register documentation Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484917448-8320-1-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).